Bosch Rexroth SHA Series Скачать руководство пользователя страница 61

Страница: 61 / 94

Operation

9.1

General

Noise!
In certain operating situations, increased

noise emission by the self-contained servo-

hydraulic linear axis is possible. This may im‐

pair the wellbeing of persons in close proximi‐

ty.

CAUTION

●

If required, provide suitable structural noise protection measures.

●

Use suitable hearing protection, if required.

On the self-contained servo-hydraulic linear axis, no adjustments or modifica‐

tions are required during operation. Only use the product within the perform‐

ance range for which the relevant self-contained servo-hydraulic linear axis is

designed. The system manufacturer is responsible for correct project plan‐

ning of the system and its control.

9.2

Operational states

9.2.1

General

The self-contained servo-hydraulic linear axis is operated via master commu‐

nication mechanisms of the IndraDrive drive controller.

For further information on master communication, please see the

application manual "Rexroth IndraDrive MPx-20 function,

R911345608", chapter “Master communication".

9.2.2

Monitoring functions of the self-contained servo-hydraulic linear axis

During operation, numerous diagnostic functions are routinely executed. Es‐

sentially, the diagnostic functions can be classified into two categories:
●

General system monitoring functions

●

Axis monitoring functions

●

Application monitoring functions

General system monitoring func‐

tions

●

Monitoring of the machine data for valid settings

●

Monitoring of the HW IO modules for error-free function

●

Monitoring of the HW signals for cable break or exceeding of range

●

Monitoring of the drive controller (FW warnings/errors)

Axis monitoring functions

●

Monitoring of various internal pressures for excessive deviations

●

Monitoring of motor temperature and oil temperature for overtempera‐

ture

●

Monitoring of various internal sequences for falling below or exceeding

time limits

Application monitoring functions

●

Monitoring of safety valves (optional)

●

Monitoring of the extended filtering system (optional)

Operating Instructions

Bosch Rexroth AG

59/91

Self-contained servo-hydraulic linear axis Type SHA...

Operation

Содержание Rexroth SHA Series































































































Результаты поиска

Содержание Rexroth SHA Series

Отзывы:

Похожие инструкции для Rexroth SHA Series

Бренды по названию

Популярные бренды

Bosch Rexroth SHA Series, Руководство по эксплуатации

Результаты поиска

Содержание Rexroth SHA Series

Отзывы:

Похожие инструкции для Rexroth SHA Series

Бренды по названию

Популярные бренды