Safety instructions 9/78
RE 66170-B/2019-05-15, Control block SB24/34, Bosch Rexroth AG
2 Safety instructions
2.1 About this chapter
The product has been manufactured in accordance with generally accepted
engineering standards. There is still, however, a risk of personal injury or property
damage if this chapter and the safety instructions in this documentation are
not observed.
▶
Read this documentation completely and thoroughly before working with the
product.
▶
Keep it in a location where it is accessible to all users at all times.
▶
Always include the required documentation when passing the product on to
third parties.
2.2 Intended use
Control blocks/control block segments are hydraulic components, meaning that in
their application area they are classified neither as complete nor as partly completed
machinery as defined in the EC Machinery Directive 2006/42/EC. The component
is exclusively intended to form partly completed machinery or complete machinery
together with other components. The component may only be commissioned after it
has been installed in the machine for which it is intended and the safety of the entire
system has been established in accordance with the machinery directive.
The control blocks/control block segments have been developed for applications
in the working hydraulics of agricultural machinery. Deviating use is only permitted
following consultation with Bosch Rexroth.
▶
Observe the technical data, the application and operating conditions and the
performance limits as specified in the data sheet and in the order confirmation.
Information about approved hydraulic fluids can be found in the corresponding
data sheet.
Intended use includes having completely read and understood this documentation
and particularly chapter 2 "Safety instructions" on page 9.
