Bosch rexroth SB11 Скачать руководство пользователя страница 4

Страница: 4 / 18

/18

Load-sensing control block SB11

| About this documentation

Bosch Rexroth AG, RE 66177-10-R/2021-11-16

1 About this documentation

1�1 Validity of the documentation

This documentation applies to load-sensing control blocks SB11 of Bosch Rexroth
including the following control block segments:

• Connecting plate, end plate

• Control valves SB11-EHS4

• Hitch control valves EHR11-EHS4

▶ Read this documentation completely and, in particular, the chapter 2

"Safety instructions" and the chapter 3 "General instructions on property and
product damage" in the related instruction manual 66177-B before you start
working with the product.

1�2 Required and supplementary documentation

▶ Only commission the product if the documentation marked with the

book symbol

is available to you and you have understood and observed it.

Table 1: Required and supplementary documentation

Title

Document number

Document type

Load-sensing control block SB11

Contains important information on the safe and proper transport, installation,
commissioning, maintenance and removal of the SB11 control block.

66177-B

Instruction manual

Technical data sheet

Contains the permissible technical data.
Please bear in mind that different technical data sheets apply depending
on the version:

Data sheet

Load-sensing control block SB11

66177

Load-sensing directional valves in sandwich plate design SB11-EHS4

66176

Plates for load-sensing control block in sandwich plate design SB11

66181

Hitch control valves EHR

66126

For related documentation on the assembly and repair, please refer to the
above-mentioned manual and, if necessary, to

www.boschrexroth.com/mobile-hydraulics-catalog

Содержание rexroth SB11



















Результаты поиска

Содержание rexroth SB11

Отзывы:

Похожие инструкции для rexroth SB11

Бренды по названию

Популярные бренды

Bosch rexroth SB11, Руководство по сборке

Результаты поиска

Содержание rexroth SB11

Отзывы:

Похожие инструкции для rexroth SB11

Бренды по названию

Популярные бренды