manualshive.com logo in svg

Bosch Rexroth R-IB IL 24 PSDO 8-PAC, Руководство пользователя

Поделиться
Скачать
Bosch Rexroth R-IB IL 24 PSDO 8-PAC Скачать руководство пользователя страница 75

PROFIsafe Terms Used in the Application Description

DOK-CONTRL-ILPSDO8****-AW04-EN-P

Bosch Rexroth AG

 73/

94

Rexroth Inline Module with Safe Digital Outputs R-IB IL 24 PSDO 8-PAC

12  PROFIsafe Terms Used in the Application Description

Some of the terms that are used in connection with PROFIsafe in this application

description are described below.

A definition of PROFIsafe terms is also provided in the PROFIsafe profile. 

CRC

Cyclic Redundancy Check

A cyclic redundancy check is used to verify the validity of the process data

contained in the safety telegram, check whether the assigned address

relationships are correct, and verify the safety-related parameters. This value is

part of the safety telegram.

Consecutive number

Method for ensuring that the safe data is transmitted completely and in the correct

order.

F-CPU

Failsafe control system, safe controller

F_Destination_Address

F-Parameter; PROFIsafe destination address; address of the safe device 

(see also 

"F-CPU"

)

F-I/O device

Failsafe I/O device; safe input and/or output modules

Modules with integrated safety functions, which are approved for safety-related

operation.

F-Parameter

(According to PROFIsafe system description, Version 09, November 2007)

F-Parameters contain information for adapting the PROFIsafe layer to specific

customer specifications and for checking the parameterization by means of a

separate method (diverse). The main F-Parameters are:

F-Slave

Failsafe slave

F_Source_Address

F-Parameter; PROFIsafe source address; address of the safe controller 

(see also 

"F-CPU"

)

F_S/D_Address

(F-Address for 

short)

A unique address for F-Devices within a PROFIsafe island. The 

technology part of the F-Device compares the value with the 

address switch locally or with an assigned F-Address in order to 

check the authenticity of the connection.

F_WD_Time

Specifies the millisecond value for the watchdog timer. The timer 

monitors the time that elapses until the next valid PROFIsafe 

message is received. 

F_SIL

Indicates the SIL that the user can expect from the relevant 

F-Device. It is compared with the manufacturer's specification that 

is stored locally.

F_iPar_CRC

A checksum that is calculated from all iParameters of the 

technology-specific part of the F-Device. 

F_Par_CRC

A CRC signature, which is created via all F-Parameters and ensures 

error-free transmission of the F-Parameters.

Содержание Rexroth R-IB IL 24 PSDO 8-PAC

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды