Standard
Description
EN 60068-2-27
Shock test
EN 61010-1
Safety requirements for electrical equipment for measurement, control
and laboratory use - Part 1: General requirements
Tab. 8-1: Standards used
8.2 FCC
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions:
●
This device may not cause harmful interferences.
●
This device has to tolerate any receiving interferences, including interferences
that can cause undesired operation.
8.3 CE marking
8.3.1 Declaration of conformity
The electronic products described in these instructions comply with the
requirements and the target of the following EU directive and the following
harmonized European standards:
EMC directive 2014/30/EU
The electronic products described in the present instructions are intended for
use in industrial environments and comply with the following requirements:
Standard
Title
DIN EN 61000-6-2
Electromagnetic compatibility (EMC)
Part 6-2: Generic standards – Immunity for
industrial environments
DIN EN 61000-6-4
Electromagnetic compatibility (EMC)
Part 6-4: Generic standards – Emission standard
for industrial environments
Tab. 8-2: Standards for electromagnetic compatibility (EMC)
Loss of CE conformity due to modifications at the device
CE marking applies only to the device upon delivery. After modifying
the device, verify the CE conformity.
8.4 UL/CSA certified
The devices are certified acc. to
●
UL 61010-2-201 (Industrial Control Equipment) and
●
CSA22.2 No. 61010-2-201 (CSA)
PR30 and VR30 Control Cabinet PC and
Panel PC
11/45
Standards
R911384706_Edition 01 Bosch Rexroth AG
