Bosch Rexroth Nexo, Руководство пользователя

Страница: 85 / 279

3 608 870 A47
Tightening Technology |
Bosch Rexroth AG 85
/279
Nexo cordless Wi-Fi nutrunner
| 3 608 870 A47/2019-10
7.5.3.2 Message specification
MID 0001 Communication start
MID 0002 Acknowledgement of communication start
MID 0002 revision 001
Sent by:
superordinate computer
Activates the command connection. Until this is done, the tightening controller will not respond to any other
command.
Note:
This message must be sent to connect the client to the tightening system.
Revision:
see MID 0002
Data field:
is empty, 0 bytes
Possible responses MID Error no. Comment
Acknowledgement of communication
start 0002
Command error 0004 96 Client already connected
Sent by:
Tightening controller
Once communication has been established, the tightening controller sends a communication start acknowledgement
as a response. This message contains basic information on the tightening controller that has accepted the connection
(cell ID, channel ID, controller name, ...).
Note: -
Revision:
001, 002, 003
Data field:
Data 37 bytes (revision 001), 42 bytes (revision 002), 105 bytes (revision 003)
Possible response:
none
Table 7–7: MID 0002 revision 001
Parameter Comments Bytes
Cell ID This is where the 7th level of the location name is returned.
The value consists of four ASCII characters.
ID
01
2
Value range
0000 – 9999
Presetting
0001
Example:
Cell ID
3
Value
0003
4
Channel ID The channel ID is the channel number value assigned in the channel
configuration. Value range 1–99
ID
02
2
Value range
01 – 20
Presetting
01
Example:
Channel number
04
Value
04
2
Controller name The controller name is the channel name assigned in the configuration of
the nutrunner. The value consists of 25 ASCII characters.
ID
03
2
Value range
0x20 – 0x7F
Presetting
***, means no controller name
Example:
Controller name
Tightening channel
Value
Tightening channel
25
Data length revision 001
37