Bosch Rexroth Nexo, Руководство пользователя

Страница: 43 / 279

3 608 870 A47
Tightening Technology |
Bosch Rexroth AG 43
/279
Nexo cordless Wi-Fi nutrunner
| 3 608 870 A47/2019-10
4.2 Adjusting the angle head
NXA011S and
NXA015S
You can adjust the angle head in 45° increments.
Tools required (not included in the scope of delivery):
•
Open-end wrench, wrench size 22 mm. Recommendation: Use the mounting aid for ESWM
3608876473 angle heads instead of the open-end wrench.
• Open-end wrench, wrench size 27 mm
Fig. 4–1: Loosening the angle head
1. Use open-end wrench 3 to hold the hand-held nutrunner at wrench face 4 of the angle head flange
(see figure 4–1 ).
2. Use open-end wrench 1 to loosen the union nut at wrench face 2 (see figure 4–1 ).
Fig. 4–2: Adjusting the angle head and tightening the lock nut
NOTICE
Improper handling may cause damage!
Damage to the hand-held nutrunner.
 Attach the mounting aid only in the clamping area allowed for the torque support (see Attaching
the torque support on page 45 ).
1
3
2
4
1
3
2
5
18 + 4 Nm