Bosch Rexroth Nexo, Руководство пользователя

Страница: 101 / 279

3 608 870 A47
Tightening Technology |
Bosch Rexroth AG 101
/279
Nexo cordless Wi-Fi nutrunner
| 3 608 870 A47/2019-10
MID 0034
Job info subscription
MID 0035
Upload job info
MID 0035 revision 002
Sent by:
superordinate computer
A message (upload job info, MID 0035) is sent to the higher-level computer each time a new job is selected and after
each tightening has been carried out during the job.
Note:
-
Revision:
001 (supported by Rexroth OP)
Data field:
is empty, 0 bytes
Possible response:
MID Error no. Comment
Command accepted 0005 -
Command error 0004 98 Activation for job info already available
Sent by:
Tightening controller
Job info transmission.
Note:
-
Revision:
002, 003 (supported by Rexroth OP)
Data field:
Data 45 bytes (revision 002), 59 bytes (revision 003)
Possible response:
MID Error no. Comment
Upload job info acknowledgement 0036 -
Table 7–21: MID 0035 revision 002
Parameter Comments Bytes
Job number Number of the job.
The value consists of four ASCII characters.
ID
01
2
Value range
0000 – 9999
Presetting
-
Example:
Job number
2
Value
0002
4
Job status Defines the status of the job.
The value consists of one ASCII character.
ID
02
2
Value range
– 0 (job not finished)
– 1 (job OK)
– 2 (job NOK)
Presetting
-
Example:
Job status
OK
Value
1
1
Job counter value OK and NOK tightening counting procedure.
– 0: only OK tightenings are counted
– 1: OK and NOK tightenings are counted
If only the OK counter is assigned for all counter values, a "0" is returned,
otherwise "1".
ID
03
2
Value range
0 - 1
Presetting
-
Example:
only OK counters
0
Value
0
1