Bosch Rexroth MAD100 Скачать руководство пользователя страница 17

Страница: 17 / 72

Safety instructions

2.1

About this product

Observe the general safety notes in this chapter and the safety instructions in

this documentation. Therewith, you avoid personal danger, damage and er‐

rors.

This operating instruction must be stored and transferred in case

of sale during the complete product lifetime.

2.2

Intended use

Prerequisites for proper and safe use of the motors are proper transport, ap‐

propriate storage, proper assembly and connection, careful maintenance, op‐

eration and overhaul.
The motors have been designed for installation in industrial machinery. The

motors are according to the following standards and directives.
Standards

EN 60034-1

Rating and performance behavior

EN 60034-5

Type of protection

Directives

2006/95/EG

Low voltage directive

The machine manufacturer must evaluate the electric and mechanic safety

as well as environmental influences in the assembled state of the machine

according to the Machine Directive 2006/42/EC and DIN EN 60204-1 (safety

of machines).
The electric installation must comply with the protection requirements of the

EMC Directive 2004/108/EC. The plant manufacturer is responsible for ap‐

propriate installation (for example: physical separation of signal and power

cables, using shielded cables, ...). The EMC instructions of the converter

manufacturer must be observed.
Start-up is prohibited as long as the conformity with these directives is de‐

clared.

2.3

Unintended use

Any use of the MAD/MAF motors outside of the specified fields of application

or under operating conditions and technical data other than those specified in

this documentation is considered to be "inappropriate use".
Unless explicitly provided for this purpose, the motors may not be used in ex‐

plosion-hazardous areas (ATEX).
Direct operation on the three-phase network is forbidden.

2.4

Qualification of personnel

For the purpose of this manual, qualified personnel means persons who are

familiar with transporting, installing, mounting, commissioning and operating

the components of the electrical drive and control system and the associated

hazards and have an appropriate qualification for their job.

MAD / MAF Asynchronous Housing Motors

3/57

Safety instructions

R911336186_Edition 02 Bosch Rexroth AG

Содержание Rexroth MAD100









































































Результаты поиска

Содержание Rexroth MAD100

Отзывы:

Похожие инструкции для Rexroth MAD100

Бренды по названию

Популярные бренды

Bosch Rexroth MAD100, Руководство по эксплуатации

Результаты поиска

Содержание Rexroth MAD100

Отзывы:

Похожие инструкции для Rexroth MAD100

Бренды по названию

Популярные бренды