Bosch Rexroth IndraMotion MTX 09VRS, Руководство пользователя

Страница: 118 / 248

tion table has one D-correction ("D1"). Alternatively, any D-correction table can
be used as the template for creating a new table.
1.
Select the directory in which the new D-correction table is to be created
in the MTX Navigator using the mouse or the arrow keys.
2. Press the <F2> "New" button and then press the <F6> "D-corrections"
button in the lower level of the F-key bar.
– or –
In the context menu, select menu item New ▶ D-corrections.
A dialog box (see fig. 7-16 " Dialog box for creating new D-correction table" on
page 106 ) for creating a new D-correction table opens (continue with point 3).
1. Press <F8> to switch to the second F-key level and press <F2> "File..." to
switch to the file functions.
2. Press the <F2> "New..." key.
A dialog box for creating a new D-correction table opens (see
fig. 7-16 "
Dialog box for creating new D-correction table" on page 106 ).
Fig.7-16: Dialog box for creating new D-correction table
3. Enter the name of the D-correction table. An automatically generated table
name is filled in by default.
4. Close the dialog box by pressing "Ok".
A D-correction table is created and is opened in the D-correction editor.
Proceed as follows to use any D-correction table as template:
1.
Open the "New" dialog box (see fig. 7-16 " Dialog box for creating new D-
correction table" on page 106 ) as described above.
2. If necessary, enter a new name for the D-correction table.
3. Select the field "Template" in the "New" dialog box.
The entry field for the name of the template (default: "DC1.dct)" is activa‐
ted. If the default "DC1.dct" template is not used, a name with the path
information of another D-correction table can be entered here. If a table
name is entered without path information, the template is sought in the
path "/database".
4. Acknowledge the entry by pressing the "Ok" button.
The new table is opened in the D-correction editor. The number of D-cor‐
rection blocks and D-correction values is adopted from the given template.
Functions on the Main Level of the D-Correction Editor
Functional key <F2> "Add correction block" can be used to add new D-correc‐
tion data sets to the table. New data sets are attached to the end of the table.
D-correction data sets are assigned running numbers (D1-D99).
<F3> "Delete correction block" is used to delete the last D-correction data set.
106/233 Bosch Rexroth AG | Electric Drives
and Controls
Rexroth IndraMotion MTX 09VRS | Application Description
Programming
Retrieval from the MTX Navigator
Retrieval from the
D-Correction Editor
Using Table Templates
Add Correction Block
Delete Correction block