Bosch Rexroth IndraControl VPB 40.3, Руководство по эксплуатации, Страница: 30 / 64

6. Remove the fastening screw (internal hexagon T10) of the slot cover and
the slot cover.
7. Insert the extension card and fix it using a fastening screw.
8. Mount the housing cover.
If the card is equipped with a Plug-and-Play (PnP) function, the card is automati-
cally detected by the operating system and integrated in the system, provided
that there are no hardware conflicts (IRQ etc.) with other extension cards or
connected devices.
There are the following causes that the functions of the new card are not availa-
ble after the system boot:
●
The card is not correctly positioned in the slot
●
The driver software of the card is not or incorrectly installed
●
IRQ (Interrupt) conflict with other hardware components of the control cabi-
net PC
●
The software of the card is not installed
10.1.4 BIOS settings
No further settings have to be made in the BIOS setup. The corresponding set-
tings have already been set for the normal operation.
If the interrupts have to be changed for specific plug-in cards, call the BIOS set-
up with <Del> while booting.
Interrupts
Free interrupts are available on the slots A1, A2 and A4 for the following pro-
cessor types:
●
Intel Core
TM
Duo L2400 1.66 GHz
●
Intel Core2 TM Duo T7400 2.16 GHz
Free interrupts are available on the slots A1 and A2 for the following processor
types:
●
Intel® Core™ i7-620M, 2.66 GHz
●
Intel® Core™ i5-520M, 2.4 GHz
●
Intel® Celeron® Dual-Core P4500, 1.86 GHz
For Intel® Core™ i7-3612QE 2.1 GHz processors, free interrupts are provided on
the slots A3 and A4.
10.2 Housing dimensions
The control cabinet PC can be mounted using mounting holes. For the corre-
sponding dimensions, please refer to the following figures:
Fix the devices with M5 screws.
Bosch Rexroth AG
Mounting, demounting and electric installation Control Cabinet PC
24/57
DOK-SUPPL*-VPB*40.3***-IT05-EN-P