Bosch Rexroth IndraControl VDP 40.3, Руководство по планированию проекта

Страница: 20 / 64

The electronic products described in this project planning manual comply with
the requirements and goals of the following EC directive and with the
harmonized European standards:
EMC guideline 2004/108/EC
The electronic products described in this project planning manual comply with
the requirements on the operation within the industrial environment:
Standard Title Edition
DIN EN
61000-6-4
(VDE
0839-6-4)
Electromagnetic compatibility (EMC)
Volume: 6-4: Generic standards – emitted
interference for industrial environments (IEC
61000-6-4:2006)
September
2007
DIN EN
61000-6-2
(VDE
0839-6-2)
Electromagnetic compatibility (EMC)
Volume: 6-2: Generic standards – noise immunity
for industrial environments (IEC 61000-6-2:2005)
March 2006
Tab. 4-7: Electromagnetic compatibility (EMC) standards
Note for the Machine Manufacturer
The electronic products described in this project planning manual do not fall
under the machines listed in the EC machinery directive. Therefore,
explanations are not required for the 2006/42/EC machinery directive and do
not exist.
2006/42/EC, the EU directive for machines, specifies the requirements on a
machine. In this directive, a machine is defined as a combination of the
components or mechanisms combined with each other. The described
products belong to the electrical equipment of a machine. Therefore, they
have to be included in the declaration of conformity of the machine
manufacturer.
The standard EN 60204-1 (safety of machinery, general requirements on the
electrical equipment of the machines) can be used for the electrical
equipment of the machines.
Loss of CE conformity due to modifications of
the device.
NOTICE
The CE marking is only valid for the device in its delivery status (ex works).
After modifying the device, the CE conformity has to be verified.
4.4.3 Certification, UL and CSA
The devices of the VDP 16.3/40.3/60.3 product family are certificated
according to
●
UL508 (Industrial Control Equipment) and
● C22.2 no. 142-M1987 (CSA)
UL file no. E210730
However, there can be combinations or extension stages with a limited or
missing certification. Thus, verify the registration according to the UL marking
on the device.
14/57
Technical data
IndraControl VDP 16.3, VDP 40.3, VDP 60.3 Operator Dis‐
play
Bosch Rexroth AG R911323862_Edition 07