Bosch REXROTH IndraControl VAM 12.1 Скачать руководство пользователя страница 35

Страница: 35 / 96

Standard

Title

Edition

DIN EN

61000-6-4
(VDE 0839-6-4)

Electromagnetic compatibility (EMC)
Volume: 6-4: Generic standards – emission stand‐

ard for industrial environments (IEC

61000-6-4:2006)

September

2007

DIN EN

61000-6-2
(VDE 0839-6-2)

Electromagnetic compatibility (EMC)
Volume: 6-2: Generic standards – noise immunity

for industrial environments (IEC 61000-6-2:2005)

March 2006

DIN EN 50178 Electronic equipment for use in power installations

(limited to overvoltage category II)

1998-14

Fig.4-12:

Electromagnetic compatibility (EMC) standards

4.7.3

UL and CSA certified

The devices of the VAM 12.1/VAM 42.1 product family are certificated accord‐

ing to
●

UL508 (Industrial Control Equipment) and

●

C22.2 no. 142-M1987 (CSA)

UL file no. E210730
However, there can be combinations or stages of expansions with limited or

missing certification. Therefore verify the certification by using the UL label on

the device.

To guarantee an UL- and CSA-compliant operation, the following

conditions have to be fulfilled:
●

Use only insulated copper wire suitable for at least 60/75 °C.

Loss of UL and CSA compliance due to

changes on the device.

NOTICE

The UL- and CSA- marking is only valid for the device in its delivery status. After

having modified the device the UL and CSA compliance must be verified.

4.8

Compatibility Test

All Rexroth controls and drives are developed and tested according to the latest

state-of-the-art of technology.
As it is not possible to follow the continuing development of all materials (e. g.

lubricants in machine tools) which may interact with our controls and drives, it

cannot be completely ruled out that any reactions with the materials used by

Bosch Rexroth might occur.
For this reason, before using the respective material a compatibility test has to

be carried out for new materials (e. g. lubricants and cleaning agents) and our

housing or our housing materials.

DOK-SUPPL*-VAM*XX.1***-PR02-EN-P
Rexroth IndraControl VAM 12.1/42.1 Machine Control Panels

Bosch Rexroth AG

33/93

Technical Data

Содержание REXROTH IndraControl VAM 12.1

































































































Результаты поиска

Содержание REXROTH IndraControl VAM 12.1

Отзывы:

Похожие инструкции для REXROTH IndraControl VAM 12.1

Бренды по названию

Популярные бренды

Bosch REXROTH IndraControl VAM 12.1, Руководство по планированию проекта

Результаты поиска

Содержание REXROTH IndraControl VAM 12.1

Отзывы:

Похожие инструкции для REXROTH IndraControl VAM 12.1

Бренды по названию

Популярные бренды