26
/84
Bosch Rexroth AG
IMdev | 3 609 929 B41/2008-09
12 Disposal
12
Disposal
Environmental protection
Careless disposal of the IMdev interface
module could lead to pollution of the
environment.
Therefore dispose of the device in
accordance with the currently applicable
regulations in your country.
You can also send the device to Bosch
Rexroth for disposal.
13
Extension and
conversion
Do not convert the IMdev interface module.
14
Troubleshooting
Malfunctions and information on errors are
displayed in the tightening system, e.g. in the
BS350.
The NS LED indicates the network status.
The MS LED indicates the module status.
If you should not be able to remedy an
occurring defect, please contact one of the
addresses that you can find under
www.boschrexroth.com or in the address
directory in chapter “16 Service and sales”
on page 28.
Table 6 NS LED malfunction table
LED
display
Meaning
Red
Error in the interface module, critical
connection error, device has
detected a network error (double
MAC ID or bus off)
Flashing
red (1 Hz)
Communication has failed, severe
communication error
Table 7 MS LED malfunction table
LED
display
Meaning
Flashing
green
(1 Hz)
Missing or incomplete
configuration
Red
The IMdev interface module can
only be made ready for operation
through measures performed by
the user.
Flashing
red (1 Hz)
Fault has been self-acknowledged
after the IMdev interface module
has remedied it.
IMdev.book Seite 26 Donnerstag, 25. September 2008 1:40 13
