background image

 

RA 50175-B/07.2016, 

Model HAB..-7X

Bosch Rexroth Corp.

  

8.1.1 

Transport by hand

 CAUTION

Risk of injury due to heavy loads (weight > 40 lbs. (15 kg)! 
When carrying bladder-type accumulators, there is a danger of health hazards.

 

Use a suitable technique for lifting, putting down and moving the system.

 

Use your personal protective equipment, e. g. safety shoes.

Bladder-type accumulators with a weight of up to 40 lbs. (15 kg) can be transported by hand 
for a short time, if necessary.

8.1.2 

Transport using a forklift

 WARNING

Falling of the bladder-type accumulator during transport! 
Risk of injury! Damage to property! 

 

Only transport the bladder-type accumulator using a forklift if it is securely strapped to a 
pallet or in stable packaging and secured against rolling away.

To transport the bladder-type accumulator using a forklift proceed as follows:

1. 

Move the fork of the forklift under the pallet/packaging of the bladder-type accumulator.

2. 

Only lift the bladder-type accumulator as far off the floor as necessary for the transport.

S

Fig. 4:  Transport using a forklift

 19

 

Transport and storage 

Содержание Rexroth HAB-7X Series

























Отзывы: