Bosch Rexroth GTE Series Скачать руководство пользователя

Страница: 27 / 88

Application Notes

5.1

Operating Conditions

5.1.1

General Information

Maximum Ambient Temperature,

Maximum Setup Elevation

The power conductors as stated in the selection data will be reached at the

following conditions:
Ambient temperature: 0...+86.00°F
Setup elevation: 0...1,000 m above sea level
The power data is reduced according to the diagram below at deviating condi‐

tions. Do occur deviating ambient temperatures and higher setup elevations at

the same time, the power data has to be multiplied with both factors.

Utilization at a higher ambient temperature of more than 86.00°F.

Utilization at a higher setup elevation than 1,000 m.

Fig.5-1:

Utilization at higher ambient temperature and higher setup elevation

Protection Class

According to DIN EN 60529-1:2000-09, the motor with mounted GTE planetary

gearbox is protected by the housing against
●

contact of parts under load or moving parts

●

Penetration of firm foreign bodies and water

At motors and the mounted servo gearboxes GTE the following protection class

IP 54 is valid
●

for the housing of motor and gearbox

●

for the output shaft of the gearbox

●

for the power and encoder connection on the motor at professional mount‐

ing.

The first reference number defines the degree of protection against contact and

penetration of foreign bodies. The reference number 5 means
●

Protection against penetration of dust (dust-proof)

●

Complete contact protection.

The second characteristic numeral defines the degree of protection against

water. The reference number 4 means
●

Protection against splashed water.

Surface Protection

The gearboxes are surface-protected by the Citrox-method. The Citrox-method

is an environmentally-sound, thermo-chemically diffusion-method, whereby

wear behavior, corrosion-resistance and fatigue resistance of the gearbox

housing are improved.

DOK-GEAR**-GTE********-PR06-EN-P
Rexroth GTE Planetary Gearboxes

Bosch Rexroth AG

25/85

Application Notes

LSA Control S.L. www.lsa-control.com [email protected] (+34) 960 62 43 01

Содержание Rexroth GTE Series

























































































Результаты поиска

Содержание Rexroth GTE Series

Отзывы:

Похожие инструкции для Rexroth GTE Series

Бренды по названию

Популярные бренды

Bosch Rexroth GTE Series, Руководство по планированию проекта

Результаты поиска

Содержание Rexroth GTE Series

Отзывы:

Похожие инструкции для Rexroth GTE Series

Бренды по названию

Популярные бренды