Operation 29/44
RE25802-XC-B/07.19, DB...5X/...XC
Bosch Rexroth AG
9 Operation
9.1 General information
WARNING
Explosion hazard by the ignition of dust accumulations!
If the maximum dust layer thickness of > 50 mm is exceeded, there is an explosion
hazard!
▶
Ensure that the maximum dust layer thickness according to EN 60079-14
and/or EN 1127 is not exceeded.
▶
Regularly remove dust accumulations, if required.
CAUTION
Loud noise!
In case of an unfavorable disposition of valves, resonance or fluid noises,
e.g. whistling, may result. In continuous operation, these noises may cause hearing
damage in persons or damage at the valves.
▶
In this case, contact a service engineer.
▶
Only use the valve within the performance range provided
in
"Data sheet 25802-XC"
. The machine and/or system manufacturer is responsible
for the correct project planning of the hydraulic system and its control.
▶
Modifications of settings on the valve are not admissible.
▶
It must be ensured that
- discharge lines of valves end in a risk-free way
- no fluid can accumulate in the discharge lines.
For information on the operation, please refer to the operating instructions
for the hydraulic system into which the valve is installed.
If errors occur, refer to chapter 14 "Troubleshooting".
