Bosch rexroth Automax 100, Руководство по эксплуатации

Страница: 72 / 102

66/94 Operation | Automax 100 | Extension module TS-AC E2-M3-1X
Bosch Rexroth AG | 05.2021 | DOK-SUPPL*-TS-AC E2-M3-ITRS-EN-P
– General information on voltage supply and current consumption

Interface
– Information about interfaces
Under „Rotary Encoding Switches“ you find information about:

Available rotary coding switch settings of „S1“ and „S2“ and the functions to be obtained
from them
Under „Diagnostic Indicators“ you find information about:

States of diagnostic displays and to be derived descriptions and information
Bus coupler navigation „Diagnostics“
You can obtain general diagnostics for the bus coupler via the „Diagnostics“ navigation item.
See the following figure
Web based management interface „Diagnostics“
Under „Bus Coupler“ you will find diagnoses on the actual status of:

Network and Connections

Device information on operating status, temperature and power supply

Local bus configuration, data exchange and process data
Under „Local Bus“ you will find diagnoses of:

The modules which are connected to the local bus
Bus coupler navigation „Modbus/TCP (UDP)“
Via the navigation item „Modbus/TCP (UDP)“ you get information about Modbus registers
and Modbus inputs/outputs.
See the following figure
Web based management interface „Modbus/TCP (UDP)“
Under „Modbus Register Overview“ you will find an overview of all Modbus registers and
associated functions:

Local bus register

Special register

Tunnel register for PDI requests and PDI confirmations

Diagnostic status and parameter register

Input and output registers

Modbus function codes
Under „Modbus I/O Table“ you will find the actual assignment of the Modbus registers.

The modules connected to the local bus