manualshive.com logo in svg

Bosch Rexroth A4VG 40 Series, Инструкция по эксплуатации, Страница: 26 / 68

Поделиться
Скачать
Bosch Rexroth A4VG 40 Series Скачать руководство пользователя страница 26

26/68 

Transport and storage

Bosch Rexroth AG

, A4VG Series 40, RE 92004-01-B/05.2017

You can hoist the axial piston unit as shown in Fig. 5 with the eye bolt screwed into 
the drive shaft.

Fig. 5: Fixing the eye bolt

wARnInG!

 Danger from suspended loads!

During transport with a lifting device, the axial piston unit can topple out of the 
lifting strap and cause injuries.

 

▶

Use the widest possible lifting strap.

 

▶

Make sure that the axial piston unit is securely fixed with the lifting strap.

 

▶

Only guide the axial piston unit by hand for fine positioning and to avoid 
oscillations.

 

▶

Never stand or put your hands under a suspended load.

 

▶

Place the lifting strap around the axial piston unit in such a way that it does not 
pass over assembled parts (e.g. valves, piping) and that the axial piston unit is 
not suspended from assembled parts (see Fig. 6).

Fig. 6: Transport with lifting strap

Transport with lifting strap

Содержание Rexroth A4VG 40 Series





































































Отзывы:

Нет отзывов