manualshive.com logo in svg

Bosch Rexroth A2FM series, Инструкция по эксплуатации

Поделиться
Скачать
Bosch Rexroth A2FM series Скачать руководство пользователя страница 29

 

RE 91001-01-X-B2/01.2016, 

Bosch Rexroth AG

 

Axial piston fixed motor | 

A2FM for explosive areas  

 

Project planning notes

 29

Project planning notes

 

▶ The motor A2FM is designed to be used in open and 

closed circuits.

 

▶ The project planning, installation and commissioning of 

the axial piston unit requires the involvement of quali‑
fied personnel.

 

▶ Before using the axial piston unit, please read the corre‑

sponding instruction manual completely and thoroughly.  
If necessary, request it from Bosch Rexroth. 

 

▶ Before finalizing your design, request a binding installation 

drawing.

 

▶ The specified data and notes must be observed.

 

▶ Depending on the operating conditions of the axial 

piston unit (working pressure, fluid temperature), 
the characteristic may shift.

 

▶ Preservation: Our axial piston units are supplied as stan‑

dard with preservative protection for a maximum of 
12 months. If longer preservative protection is required 
(maximum 24 months), please specify this in plain text 
when placing your order. The preservation periods apply 
under optimal storage conditions, details of which can be 
found in the data sheet 90312 or the instruction manual.

 

▶ Not all variants of the product are approved for use in 

safety functions according to ISO 13849. Please consult 
the responsible contact person at Bosch Rexroth if you 
require reliability parameters (e.g. MTTFd) for functional 
safety.

 

▶ Working ports:

 

– The ports and fastening threads are designed for the 

specified maximum pressure. The machine or system 
manufacturer must ensure that the connecting ele‑
ments and lines correspond to the specified applica‑
tion conditions (pressure, flow, hydraulic fluid, tem‑
perature) with the necessary safety factors.

 

– The working line ports and function ports can only 

be used to accommodate hydraulic lines.

Safety instructions

 

▶ During and shortly after operation, there is a risk of 

burns on the axial piston unit and especially on the 
solenoids. Take appropriate safety measures (e.g. by 
wearing protective clothing).

 

▶ Moving parts in control equipment (e.g. valve pistons) 

can, under certain circumstances get blocked in posi‑
tion as a result of contamination (e.g. impure hydraulic 
fluid, abrasion, or residual dirt from components).  
As a result, the hydraulic fluid flow or build‑up of torque 
of the axial piston unit will no longer respond correctly 
to the operator's commands. Even the use of various 
filter elements (external or internal flow filter) will not 
rule out a fault but merely reduce the risk. The machine/
system manufacturer must test whether remedial mea‑
sures are needed on the machine for the application 
concerned in order to set the consumer being driven 
to a safe position (e.g. safe stop) and if necessary to 
ensure it is properly implemented.

Содержание Rexroth A2FM series































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды