Bosch rexroth 4WS2EM10 5X XH Series Скачать руководство пользователя страница 23

Страница: 23 / 44

Assembly 23/44

RE29583-XH-B/09.19, 4WS2EM10..5X/...XH...,

Bosch Rexroth AG

7.4 Prior to assembly

WARNING

Explosion hazard due to wrong area of application!

A valve which is not approved for the area of application may cause an explosion!

▶

Check whether all the explosion protection marks on the name plate of the valve
comply with the information in these operating instructions.

▶

Please check if you have the right valve type by means of the type designation on
the name plate of the valve.

▶

Make sure that the zone and the temperature class correspond to the area of
application of the valve.

▶

Check the scope of delivery for completeness and possible transport damage.

▶

Also observe the safety instructions in chapter 2.6 "Product-specific safety
instructions".

▶

Transport protection elements (e.g. cover plates, protective plugs) must be
removed prior to use in an explosive atmosphere.

7.5 Required tools

In order to assemble the valve, you need standard tools only.

7.6 Required accessories

The following accessories are recommended for the connection of the valve.
These accessories can be ordered separately from Bosch Rexroth:

For subplates with dimensions for valves with porting pattern
according to ISO 4401, refer to

"Data sheet 45100"

Table 7: Flushing plate

Material number

Flushing plate with FKM seals,
according to ISO 4401-05-05-0-05

R900912450

Table 8: Test device

Documentation to be carried

Test device VT-SVTSY, battery-operated, can optionally be
operated with power supply unit

Data sheet 29681

Subplates

Flushing plate

Test device

Содержание rexroth 4WS2EM10 5X XH Series













































Результаты поиска

Содержание rexroth 4WS2EM10 5X XH Series

Отзывы:

Похожие инструкции для rexroth 4WS2EM10 5X XH Series

Бренды по названию

Популярные бренды

Bosch rexroth 4WS2EM10 5X XH Series, Руководство по эксплуатации

Результаты поиска

Содержание rexroth 4WS2EM10 5X XH Series

Отзывы:

Похожие инструкции для rexroth 4WS2EM10 5X XH Series

Бренды по названию

Популярные бренды