Bosch rexroth 4WS2EM10 5X XH Series Скачать руководство пользователя страница 24

Страница: 24 / 44

24/44 Assembly

Bosch Rexroth AG

, 4WS2EM10..5X/...XH..., RE29583-XH-B/09.19

WARNING

Explosion hazard!

Flushing plate and test device are

not

approved according to the EU explosion

protection directive 2014/34/EU. Use of these components in an explosive
atmosphere may cause an explosion!

▶

The flushing plate and test device may only be used if the formation of explosive
atmospheres during use of these components can be excluded.

For information on the servo amplifier (external), see

"Data sheet 29583-XH"

for information on the mating connector, see

"Data sheet 29583-XH"

The addresses of our responsible sales organizations can be found online under

www.boschrexroth.com

and in appendix 16.1 "List of addresses".

7.7 Assembling the valve

7.7.1 Flushing the system

WARNING

Faulty mounting!

Fastening the flushing plate using mounting screws of reduced stability may cause
the flushing plate to become loose. Consequently, hydraulic fluid may leak and lead
to personal injuries and/or damage to property.

▶

Completely assemble the flushing plate according to the assembly specifications
using suitable assembly aids.

▶

Observe the tightening torques, screw stabilities and the minimum length of the
mounting screws.

▶

Always fasten the flushing plate with all 4 mounting screws.

▶

Only assemble the flushing plate using the mounting screws intended for that
purpose and included in the scope of delivery.

Servo amplifier (external)

Mating connector

Ordering address for

accessories and valves

Содержание rexroth 4WS2EM10 5X XH Series













































Результаты поиска

Содержание rexroth 4WS2EM10 5X XH Series

Отзывы:

Похожие инструкции для rexroth 4WS2EM10 5X XH Series

Бренды по названию

Популярные бренды

Bosch rexroth 4WS2EM10 5X XH Series, Руководство по эксплуатации

Результаты поиска

Содержание rexroth 4WS2EM10 5X XH Series

Отзывы:

Похожие инструкции для rexroth 4WS2EM10 5X XH Series

Бренды по названию

Популярные бренды