Safety instructions 9/48
RE 29115-XE-B/09.19, 4WRZ..7X/...XE...,
Bosch Rexroth AG
Abbreviation
Meaning
A, B
Hydraulic connections (actuators)
T
Hydraulic connection (tank)
P
Hydraulic connection (pump)
ANSI
American National Standards Institute
2 Safety instructions
2.1 General information on this chapter
The product has been manufactured according to the generally accepted codes
of practice. However, there is still a danger of personal injury and damage
to property if you do not observe this chapter and the safety instructions in this
documentation.
▶
Read this documentation completely and thoroughly before working with the
product.
▶
Keep this documentation in a location where it is accessible to all users at all
times.
▶
Always include the required documentation when you pass the product
on to third parties.
2.2 Intended use
The product is a hydraulic component.
You may use the product as follows:
• as a proportional directional valve, pilot-operated, without electrical position
feedback for the intended use in an explosive atmosphere.
The product is only intended for professional use and not for private use.
Intended use includes having read and understood this documentation completely,
especially chapter 2 “Safety instructions”.
The valve is designed and constructed for the control of oil flows. It complies with
the requirements of the ATEX directive 2014/34/EU.
Details about the device group, category, temperature class and equipment
protection level (EPL) in accordance with ATEX directive 2014/34/EU and the derived
standards are provided in
“Data sheet 29115-XE”
under
“Information on explosion
protection”
and on the name plate of the valve.
The valve may only be operated in a technically perfect condition and used
as described in these operating instructions. The connection conditions, application
conditions and performance data defined in these operating instructions must not
be changed.
