manualshive.com logo in svg

Bosch Rexroth 2THE5R, Инструкция по эксплуатации

Поделиться
Скачать
Bosch Rexroth 2THE5R Скачать руководство пользователя страница 16

16

/24

 

2THE5R, 4THE5NR, 4TH5NR

 | Installation

Bosch Rexroth AG, RE 29698-01-B/2021-06-22

7�3�3  Installation

NOTICE!

 The product should not be installed in a cavity. All the dust, water and 

mud must be evacuated and not remain in contact with the pedal. In case of 
damaged or disassembled boot, the product must be repaired.

1� 

Insert the pedal in the floor with care to prevent damage on the wiring or 
protection boot.

2� 

Fasten the pedal using the specified mounting bolt, required tightening torque 
written on installation drawing (maximum tightening torque 30 Nm).

3� 

Make sure the boot is in its correct position for an optimal protection. Note 
that this boot has no pannel IP relevance.

4� 

Connect the product with caution regarding the pin-out written on the 
installation drawing.

7�3�4  Notice on wiring and circuitry

 

• Lines from the pedal to the electronics must not be routed close to other 

power-conducting lines in the machine.

 

• The wiring harness should be mechanically secured in the area in which the 

pedal is installed.

 

• If possible, lines should be routed in the machine interior. If the lines are routed 

outside of the machine, their secure mounting is to be ensured.

 

• Lines must not be kinked or twisted, must not rub against edges and must not be 

routed through sharp-edged ducts without protection.

7�3�5  Electrically connecting the pedal

Y

1

1 

Supply and output connector

View Y

View Y

Pin 1

Pin 3

Pin 2

Pin 6

Pin 4

Pin 5

Pin 1

Pin 2

Pin 4

Pin 3

6-pin connector for 4THE5NR 

DEUTSCH DT04–06P–CE03

4-pin connector for 2THE5R and 4TH5NR

DEUTSCH DT04–4P–CE03

Fig. 3: Pin assignment

Содержание Rexroth 2THE5R

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды