PowerBoost
en
9
7.1 Switch-off timer
Allows you to programme a cooking time for a hotplate
and its automatic switch-off once the set time has
elapsed.
Programming the cooking time
1.
Select the cooking zone and the required power
level.
2.
Touch .
a
The display lights up in the cooking zone.
3.
Use or to select the cooking time.
a
The time begins to count down.
Note:
You can automatically set the same cooking time
for all cooking zones. You can find more information
about this under
→
.
Changing or deleting the cooking time
1.
Select the cooking zone.
2.
Touch .
3.
To change the cooking time, touch or or set it
to .
7.2 Timer
Enables the activation of a timer of 0–99 minutes. This
function can be used independently of the cooking
zones and other settings. It does not automatically
switch off the hotplates.
Setting the kitchen timer
1.
Select the hotplate and touch twice.
a
beside lights up.
2.
Use or to select the required time.
a
The time counts down.
Changing or deleting the timer duration
1.
Touch repeatedly until the display beside
lights up.
2.
To change the cooking time, touch or or set it
to .
8 PowerBoost
Allows larger volumes of water to be heated more
quickly than with the power level .
You can then activate this function for a cooking zone,
provided no other cooking zone in the same group is
in use (see illustration). Otherwise and flash in the
power level display.
Press
to switch on or off.
9 Childproof lock
The hob is equipped with a childproof lock. This pre-
vents children from switching on the hob.
To switch the function on, switch the hob off.
Touch
for four seconds to switch on or off.
If you want to activate the childproof lock automatically
every time the hob is switched off, you can find further
information under Basic settings →
10 Basic settings
You can configure the basic settings for your appliance to meet your needs.
10.1 Overview of the basic settings
Display
Setting
Value
Childproof lock
- Manual.
1
Automatic.
– Switched off.
Audible signals
– Confirmation and fault signals are switched off.
– Only the fault signal is switched on.
– Only the confirmation signal is switched on.
– All signal tones are switched on
1
.
Automatic switch-off of the cooking zones.
– switched off.
1
- - minutes until the appliance switches off auto-
matically.
Duration of the timer end signal tone
– 10 seconds
1
– 30 seconds
- 1 minute
1
Factory setting
Содержание PUC BB Series
Страница 15: ......