14
| English
1 609 929 S63 | (19.3.09)
Bosch Power Tools
Products sold in GB only
: Your product is fitted
with an BS 1363/A approved electric plug with
internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets,
it should be cut off and an appropriate plug fit-
ted in its place by an authorised customer serv-
ice agent. The replacement plug should have the
same fuse rating as the original plug.
The severed plug must be disposed of to avoid a
possible shock hazard and should never be in-
serted into a mains socket elsewhere.
Products sold in AUS and NZ only
: Use a resid-
ual current device (RCD) with a rated residual
current of 30 mA or less.
Functional Description
Read all safety warnings and all in-
structions.
Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
Intended Use
The machine is intended for tacking of card-
board, insulating material, fabric, foils, leather
and similar materials on surfaces of wood or ma-
terials similar to wood. The machine is not suit-
able for the attachment of wall and ceiling pan-
elling.
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1
Trigger
2
Thumbwheel for hammer-force preselection
3
Magazine slider
4
Latching aperture for support foot
5
Latching aperture for spacer clamp
6
Latching aperture for stapler plate
7
Tacker head
8
Duotac automatic selector switch
9
Nail strip*
10
Staple strip*
11
Magazine
12
Support foot*
13
Stapler plate*
14
Spacer clamp*
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
Technical Data
Noise/Vibration Information
Measured values determined according to
EN 50144.
Typically the A-weighted noise levels of the
product are: Sound pressure level 83 dB(A);
Sound power level 94 dB(A). Uncertainty
K =3 dB.
Wear hearing protection!
The hand-arm acceleration is typically below
2.5 m/s
2
.
Tacker
PTK 14 E
Article number
0 603 265 2..
Impact rate
min
-1
30
Intermittent operation
min
15
Staple width
mm
11.4
Staple length
mm
6– 14
Nails
mm
14
Magazine capacity,
max.
100
Weight according to
EPTA-Procedure
01/2003
kg
1.1
Protection class
/
II
The values given are valid for nominal voltages [U] of
230/240 V. For lower voltage and models for specific
countries, these values can vary.
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.
OBJ_BUCH-109-002.book Page 14 Thursday, March 19, 2009 3:07 PM
Содержание PTK 14 E
Страница 2: ...1 609 929 S63 19 3 09 Bosch Power Tools 2 electronic 1 2 3 4 5 6 PTK 14 E 1 2 3 7 8 4 6 5 ...
Страница 3: ... 3 Bosch Power Tools 1 609 929 S63 19 3 09 C B A 3 12 10 9 11 14 13 ...
Страница 90: ...1 609 929 S63 19 3 09 Bosch Power Tools 90 a l l 2 608 110 002 2 607 000 098 1 605 438 044 ...