1 609 929 M89 | (5.11.07)
Bosch Power Tools
14
| English
f
Hold power tool by the insulated gripping
surfaces, when performing an operation
where the cutting tool may run into hidden
wiring.
Contact with a “live” wire will make
exposed metal parts of the tool “live” and
shock the operator.
f
Hold the machine with a firm grip.
High reac-
tion torque can briefly occur while driving in
and loosening screws.
f
Secure the workpiece.
A workpiece clamped
with clamping devices or in a vice is held more
secure than by hand.
f
Keep your workplace clean.
Blends of mate-
rials are particularly dangerous. Dust from
light alloys can burn or explode.
f
Always wait until the machine has come to a
complete stop before placing it down.
The
tool insert can jam and lead to loss of control
over the power tool.
f
Avoid unintentional switching on. Ensure the
On/Off switch is in the off position before in-
serting battery pack.
Carrying the power tool
with your finger on the On/Off switch or in-
serting the battery pack into power tools that
have the switch on invites accidents.
f
Do not open the battery.
Danger of short-
circuiting.
Protect the battery against heat, e. g.,
also against continuous sun irradiation
and fire.
There is danger of explosion.
Functional Description
Read all safety warnings and all in-
structions.
Failure to follow the
warnings and instructions may result
in electric shock, fire and/or serious
injury.
Intended Use
The machine is intended for driving in and loos-
ening screws as well as for drilling in wood, met-
al, ceramic and plastic.
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1
Keyless chuck
2
Front sleeve
3
Rear sleeve
4
Torque preselection ring
5
Indicator for right rotation
6
Indicator for left rotation
7
Soft grip
8
Screwdriver bit*
9
Battery unlocking button
10
Battery
11
“Power Light”
12
Rotational direction switch
13
On/Off switch
14
Universal bit holder*
*The accessories illustrated or described are not in-
cluded as standard delivery.
Noise/Vibration Information
Measured values determined according to
EN 60745.
Typically the A-weighted sound pressure level of
the product is 75 dB(A). Uncertainty K=3 dB.
The noise level when working can exceed
80 dB(A).
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Drilling into metal: Vibration emission value
a
h
<2.5 m/s
2
, Uncertainty K=1.5 m/s
2
,
Screwdriving: Vibration emission value
a
h
<2.5 m/s
2
, Uncertainty K=1.5 m/s
2
.
The vibration emission level given in this informa-
tion sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another. It
may be used for a preliminary assessment of ex-
posure.
OBJ_BUCH-149-003.book Page 14 Monday, November 5, 2007 10:04 AM
