English |
35
Bosch Power Tools
1 609 92A 0UN | (20.8.14)
Operation
Starting Operation
Reversing the rotational direction (see figure C)
The rotational direction switch
7
is used to reverse the rotational direction
of the machine. However, this is not possible with the On/Off switch
8
ac-
tuated.
Right Rotation:
For drilling and driving in screws, push the rotational di-
rection switch
7
left to the stop.
The indicator for right rotation
4
lights up when the On/Off
switch
8
is actuated and the motor is running.
Left Rotation:
For loosening or unscrewing screws, push the rotational
direction switch
7
right to the stop.
The indicator for left rotation
6
lights up when the On/Off switch
8
is actuated and the motor is running.
Setting the torque
The required torque can be preselected in 20 steps with the torque prese-
lection ring
3
. With the correct setting, the insert tool is stopped as soon
as the screw is screwed flush into the material or when the set torque is
reached.
Select a higher setting when driving out screws, or set to the symbol “Drilling”.
Switching On and Off
To
start
the machine, press the On/Off switch
8
and keep it pressed.
The power light
9
lights up when the On/Off switch
8
is slightly or com-
pletely pressed, and allows the work area to be illuminated when lighting
conditions are insufficient.
To
switch off
the machine, release the On/Off switch
8
.
To save energy, only switch the power tool on when using it.
Adjusting the Speed
The speed of the switched on power tool can be variably adjusted, de-
pending on how far the On/Off switch
8
is pressed.
Light pressure on the On/Off switch
8
results in a low rotational speed.
Further pressure on the switch results in an increase in speed.
OBJ_DOKU-26180-004.fm Page 35 Wednesday, August 20, 2014 11:55 AM
