English |
19
Bosch Power Tools
1 609 929 S60 | (21.7.09)
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure.
The declared vibration emission level repre-
sents the main applications of the tool. However
if the tool is used for different applications, with
different accessories or poorly maintained, the
vibration emission may differ. This may signifi-
cantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibra-
tion should also take into account the times
when the tool is switched off or when it is run-
ning but not actually doing the job. This may sig-
nificantly reduce the exposure level over the to-
tal working period.
Identify additional safety measures to protect
the operator from the effects of vibration such
as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
Vacuum cleaner
Measured values determined according to
EN 60704.
Typically the A-weighted sound pressure level of
the product is 77 dB(A). Uncertainty K=3 dB.
Declaration of Conformity
Multi Sander
We declare under our sole responsibility that
the product described under “Technical data” is
in conformity with the following standards or
standardization documents: EN 792 according
to the provisions of the directives 98/37/EC (un-
til 28 Dec 2009), 2006/42/EC (from
29 Dec 2009).
Technical file at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
Vacuum cleaner
We declare under our sole responsibility that
the product described under “Technical Data” is
in conformity with the following standards or
standardization documents: EN 60335 accord-
ing to the provisions of the directives
2006/95/EC, 2004/108/EC.
05
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
23.06.2009
Assembly
Replacing/Inserting the Dust Bag
(see figures B and C)
Unlatch both latches
5
and fold up the vacuum
lid
14
.
Open the closing flap
16
and guide the dust bag
18
from the top into the guide
17
as shown in
the figure. Shut the closing flap
16
again until it
can be heard to engage.
When removing a full dust bag, ensure that the
dust bag enclosure is clean. If required, clean
the enclosure with a moist cloth or a brush.
Fold down and lock the vacuum lid
14
with the
latches
5
.
Operating Modes of the Vacuum
Cleaner (see figure A)
f
Before using the vacuum cleaner, always re-
move the plug cap 9. Pay attention that the
bypass valve 15 is never restricted or
blocked.
The motor of the vacuum cleaner
can overheat und become damaged.
Dr. Egbert Schneider
Senior Vice President
Engineering
Dr. Eckerhard Strötgen
Head of Product
Certification
OBJ_BUCH-39-004.book Page 19 Tuesday, July 21, 2009 2:15 PM