Bosch PSB 650 RA, Оригинальное руководство пользователя

Страница: 24 / 140

24 | English
2 609 004 159 | (7.9.09) Bosch Power Tools
Reattach the dust collector 12 again and lock it
by pressing against the smooth surface of the
release button
15 .
Removing the Extraction Device (see figure E)
For disassembly of the extraction device 11 ,
press release button 19 and pull off the extrac-
tion device 11 toward the front.
Stowing the Extraction Device (see figure F)
For stowing the extraction device 11 in the case,
remove the extraction device 11 , slide it togeth-
er and attach clamp 20 .
Attach the locking latch 21 or empty the dust
collector 12 before placing down the extraction
device.
Auxiliary Handle
f Operate your machine only with the auxilia-
ry handle 9.
The auxiliary handle 9 can be set to any position
for a secure and low-fatigue working posture.
Turn the wing bolt for adjustment of the auxilia-
ry handle
10 in anticlockwise direction and set
the auxiliary handle 9 to the required position.
Then tighten the wing bolt 10 again in clockwise
direction.
Adjusting the Drilling Depth (see figure G)
The required drilling depth X can be set with the
depth stop 1 .
Press the button for the depth stop adjustment
3 and insert the depth stop into the auxiliary
handle 9 .
The knurled surface of the depth stop 1 must
face downward.
Pull out the depth stop until the distance be-
tween the tip of the drill bit and the tip of the
depth stop correspond with the desired drilling
depth
X .
Changing the Tool
Keyless Chuck (PSB 750 RCE/PSB 750 RCA)
(see figure H)
The drill spindle is locked when the On/Off
switch
8 is not pressed. This makes quick, con-
venient and easy changing of the tool in the drill
chuck possible.
Open the keyless chuck
2 by turning in rotation
direction
n
, until the tool can be inserted. Insert
the tool.
Firmly tighten the collar of the keyless chuck
2
by hand in rotation direction
o
until the locking
action (“click”) is no longer heard. This automat-
ically locks the chuck.
The locking is released again to remove the tool
when the collar is turned in the opposite direc-
tion.
Keyless Chuck (PSB 650 RE/PSB 6500 RE/
PSB 650 RA) (see figure I)
f
Press the spindle lock button 24 only when
the machine is at a standstill.
The drill spindle is locked by pressing the spin-
dle lock button
24 . This makes quick and easy
changing of the tool in the drill chuck possible.
Open the keyless chuck
2 by turning in rotation
direction
n
, until the tool can be inserted. Insert
the tool.
Firmly tighten the collar of the keyless chuck
2
by hand in rotation direction
o
until the locking
action (“click”) is no longer heard. This automat-
ically locks the chuck.
The locking is released again to remove the tool
when the collar is turned in the opposite direc-
tion.
Screwdriver Tools
When working with screwdriver bits 23 , a uni-
versal bit holder 22 should always be used. Use
only screwdriver bits that fit the screw head.
For driving screws, always position the “Drill-
ing/Impact Drilling” selector switch
4 to the
“Drilling” symbol.
OBJ_BUCH-911-002.book Page 24 Monday, September 7, 2009 1:08 PM