English |
13
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture.
There is a risk of explosion and
short-circuiting.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for tightening and loosening
screws, as well as for drilling in wood, metal, ceramic and
plastic and for impact drilling in brick, masonry and stone.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
Tool holder
(2)
Keyless chuck
(3)
Torque presetting ring
(4)
Mode selector switch
(5)
Gear selector switch
(6)
Right rotational direction indicator
(7)
Left rotational direction indicator
(8)
Rotational direction switch
(9)
Battery release button
(10)
Battery
A)
(11)
Light
(12)
Battery charge indicator
(13)
On/off switch
(14)
Handle (insulated gripping surface)
(15)
Universal bit holder
A)
(16)
Screwdriver bit
A)
A)
Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Cordless combi drill
PSB 1800 LI-2
Article number
3 603 JA3 3..
Rated voltage
V=
18
No-load speed
A)
– 1st gear
min
-1
0–400
– 2nd gear
min
-1
0–1350
Impact rate
A)
min
-1
20250
Cordless combi drill
PSB 1800 LI-2
Max. torque according to ISO 5393
A)
– Steel
Nm
39
– Wood
Nm
19
Max. drilling diameter
– Masonry
mm
10
– Steel
mm
10
– Wood
mm
30
Max. screw diameter
mm
8
Chuck capacity
mm
1–10
Weight according to
EPTA-Procedure 01:2014
A)
kg
1.6
Recommended ambient tem-
perature during charging
°C
0 to +35
Permitted ambient temperat-
ure during operation
B)
and dur-
ing storage
°C
–20 to +50
Recommended batteries
PBA 18V...W-.
Recommended chargers
C)
AL 18...
A) Depends on battery in use
B) Limited performance at temperatures <0 °C
C) The following chargers are not compatible with the PBA re-
chargeable battery: AL 1814 CV, AL 1820 CV, AL 1860 CV
Noise/vibration Information
Noise emission values determined according to
EN 62841-2-1
.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level
87
dB(A); sound power level
98
dB(A). Uncertainty K =
5
dB.
Wear hearing protection
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to
EN 62841-2-1
:
Drilling into metal: a
h
<
2.5
m/s
2
, K =
1.5
m/s
2
,
Impact drilling into concrete: a
h
=
16.0
m/s
2
, K =
2.0
m/s
2
.
Screwdriving: a
h
<
2.5
m/s
2
, K =
1.5
m/s
2
.
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Bosch Power Tools
1 609 92A 4FL | (20.12.2019)
