Bosch Professional GWS 18-125 L, Оригинальное руководство пользователя, Страница: 10 / 76

10 | English
1 609 92A 3ZY | (14.12.17) Bosch Power Tools
Assembly
Mounting the Protective Devices

Before any work on the machine itself, pull the mains
plug.
Note: After breakage of the grinding disc during operation or
damage to the holding fixtures on the protection guard/power
tool, the machine must promptly be sent to an after-sales ser-
vice agent for maintenance. For addresses, see section “Af-
ter-sales Service and Application Service”.
Protection Guard for Grinding
Place the protection guard 12 on-
to the spindle collar as shown in
the illustration. The triangle marks
on the protection guard must cor-
respond with the respective
marks on the gear case.
Press the protection guard 12 on-
to the spindle collar until the
shoulder of the protection guard
is seated against the flange of the
machine, and turn the protection
guard until it can clearly be heard
to engage.
Adjust the position of the protection guard 12 to the require-
ments of the work process. For this, press the release lever 1
upward and turn the protection guard 12 to the required po-
sition.

Adjust the protection guard 12 in such a manner that
sparking is prevented in the direction of the operator.

The protection guard 12 may be turned only upon actu-
ation of the release lever 1! Otherwise the power tool
may not continue to be used under any circumstances
and must be taken to an after-sales service agent.
Note: The encoding keys on the protection guard 12 ensure
that only a protection guard that fits the machine type can be
mounted.
Protection Guard for Cutting

For cutting with bonded abrasives, always use the pro-
tection guard for cutting 14.

Provide for sufficient dust extraction when cutting
stone.
The protection guard for cutting 14 is mounted in the same
manner as the protection guard for grinding 12 .
Cutting Guide with Dust Extraction Protection Guard
The cutting guide with dust extraction protection guard 21 is
mounted in the same manner as the protection guard for
grinding
12 .
Extraction Hood for Sanding
The extraction hood 7 can be used for low-dust sanding of
paint, varnish and plastics in conjunction with the carbide
grinding head
9 or the rubber sanding plate 17 with a sanding
sheet 18 . The extraction hood 7 is not suitable for working
metals.
A suitable Bosch vacuum cleaner can be connected to the ex-
traction hood
7 .
The extraction hood 7 is mounted in the same manner as the
protection guard 12 . The brush collar is exchangeable.
Angle Grinder GWS ... 18-125 L Inox 18-125 PL Inox 18-150 L 18-150 PL
Article number 3 601 ... GA4 0.. GA4 1.. GA5 0.. GA5 1..
Rated power input W 1800 1800 1800 1800
Output power W 1145 1145 1145 1145
Rated speed min
-1
8100 8100 10000 10000
Speed control adjustment min
-1
– – – –
Grinding disc diameter, max. mm 125 125 150 150
Thread of grinder spindle M 14 M 14 M 14 M 14
Thread length (max.) of grinder spindle mm 22 22 22 22
Kickback stop
   
Restarting Protection
   
Reduced starting current
   
Constant electronic control
   
Speed preselection – – – –
Weight according to EPTA-Procedure
01:2014
– with vibration-damping auxiliary handle
– with standard-auxiliary handle
kg
kg
2.5
2.3 2.5
2.3 2.5
2.4 2.5
2.4
Protection class /
II
/
II
/
II
/
II
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
OBJ_BUCH-3473-001.book Page 10 Thursday, December 14, 2017 10:33 AM