Bosch Professional GCO 14-24, Оригинальное руководство пользователя

Страница: 10 / 75

10 | English
(4) Retracting blade guard
(5) Spindle lock
(6) Cutting disc
(7) Angle guide
(8) Locking spindle
(9) Quick release
(10) Spindle handle
(11) Mounting holes
(12) Hex key (8 mm)
(13) Base plate
(14) Locking screw for angle guide
(15) Transport safety lock
(16) Tool arm
(17) Transport handle
(18) Protective guard
(19) Spark guard plate
(20) Tool spindle
(21) Clamping flange
(22) Washer
(23) Hexagon screw
Technical Data
Cut-off grinder GCO 14-24
Article number 3 601 M37 1..
Rated power input W 2400
No-load speed min
-1
3800
Weight according to EPTA-
Procedure 01:2014 kg 17.0
Protection class / II
Permitted workpiece dimensions (maximum/minimum): (see "Per-
missible workpiece dimensions", page 12)
The specifications apply to a rated voltage [U] of 230 V. These spe-
cifications may vary at different voltages and in country-specific mod-
els.
Dimensions of suitable cutting discs
Max. cutting disc diameter mm 355
Max. cutting disc thickness mm 3
Hole diameter mm 25.4
Assembly
u
Avoid starting the power tool unintentionally. The
mains plug must not be connected to the power supply
during assembly or when carrying out any kind of
work on the power tool.
Items included
Carefully remove all parts included in the delivery from their
packaging.
Remove all packing material from the power tool and the ac-
cessories provided.
Check to ensure that all the parts listed below have been
supplied before using the power tool for the first time:
– Cut-off grinder with cutting disc fitted
– Hex key
(12)
Note: Check the power tool for possible damage.
Before continuing to use the power tool, carefully check that
all protective devices or slightly damaged parts are working
perfectly and according to specifications. Check that the
moving parts are working perfectly and without jamming;
check whether any parts are damaged. All parts must be fit-
ted correctly and all the conditions necessary to ensure
smooth operation must be met.
If the protective devices or any parts become damaged, you
must have them properly repaired or replaced by an author-
ised service centre.
Stationary or flexible mounting
u
To ensure safe handling, the power tool must be
mounted on a flat, stable work surface (e.g. work
bench) before use.
Mounting on a work surface (see figure A)
– Use suitable screw fasteners to secure the power tool to
the work surface. Use the holes (11) to do this.
Flexible installation (not recommended)
In exceptional circumstances, if it is not possible to securely
mount the power tool on a work surface, you can improvise
by placing the feet of the base plate
(13) on an appropriate
base (e.g. workbench, flat ground, etc.), without screwing
down the power tool.
Changing the Cutting Disc (see figures B1 − B2)
u
Pull the plug out of the socket before carrying out any
work on the power tool.
u
Do not activate the spindle lock (5) while the tool
spindle (20) is moving.
The power tool may become
damaged if you do this.
u
Do not touch the cutting disc after use until it has
cooled.
The cutting disc becomes very hot during use.
Only use cutting discs that match the specifications given in
this operating manual and that have been tested and marked
in accordance with EN 12413.
Use any intermediate layers provided with the cutting disc.
Place unused cutting discs in an enclosed container or their
original packaging. Store the cutting discs lying flat.
Removing the cutting disc
– Bring the power tool into the work position.
– Swivel the retracting blade guard
(4) backwards as far as
possible.
– Turn the hexagon screw (23) using the hex key (12)
provided while pressing the spindle lock (5) until it en-
gages.
– Hold the spindle lock down and unscrew the hexagon
screw (23) .
1 609 92A 6CW | (18.01.2021) Bosch Power Tools