Bosch Professional GCM 18V-305 GDC, Оригинальное руководство пользователя

Страница: 21 / 227

English | 21
(54) Hex socket screw for mounting the saw blade
(55) Clamping flange
(56) Inner clamping flange
(57) Clamping lever of the saw table extension
(58) Locking screw for the adjustable fence
(59) Damper
(60) Set screws for damping
(61) Holes for screw clamp
(62) Wing bolt
(63) Threaded rod
(64) Angle indicator for mitre angles
(65) On/off switch
(66) Screws for insert plate
(67) Clamping screw for length stop
(68) Set screws for positioning the laser (flush align-
ment)
(69) /
(70) /
(71)
Set screws for 0° basic setting (bevel angle)
(72) Set screw for 45° basic setting (left-hand bevel
angle)
(73) Set screw for 45° basic setting (right-hand bevel
angle)
(74) Set screws for mitre angle scale
(75) Screw for mitre angle indicator
(76) Set screw for adjusting the clamping force of the
clamping handle for any bevel angle
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Sliding mitre saw GCM 18V-305 GDC
Article number 3 601 M43 0..
Rated voltage V= 18
No-load speed
A)
min
-1
3000−4000
No-load speed in ECO mode
A)
min
-1
2550
Laser type nm 650
mW < 1
Laser class 1M
Divergence of laser line mrad
(full
angle)
1.0
Weight according to EPTA-Pro-
cedure 01:2014
B)
kg 26.9−27.8
Recommended ambient tem-
perature during charging °C 0 to +35
Permitted ambient temperature
during operation
C)
and during
storage
°C –20 to +50
Sliding mitre saw GCM 18V-305 GDC
Recommended rechargeable
batteries GBA 18V...
ProCORE18V...
Recommended chargers GAL 18...
GAX 18...
GAL 36...
Data transmission
Bluetooth
®
Bluetooth
®
4.2
(Low Energy)
D)
Signal interval s 8
Max. signal range
E)
m 30
Dimensions of suitable saw blades
Saw blade diameter mm 305
Base blade thickness mm 1.7–2.6
Max. cutting width mm 3.2
Hole diameter mm 30
A) Measured at 20–25 °C with rechargeable battery ProCORE18V
8.0Ah .
B) Depends on battery in use
C) Limited performance at temperatures <0 °C
D) The mobile terminal devices must be compatible with
Bluetooth
®
Low Energy devices (version 4.2) and support the Generic Ac-
cess Profile (GAP).
E) The signal range may vary greatly depending on external condi-
tions, including the receiving device used. The Bluetooth ® range
may be significantly weaker inside closed rooms and through
metallic barriers (e.g. walls, shelving units, cases, etc.).
Permitted workpiece dimensions (maximum/minimum): (see "Per-
missible workpiece dimensions", page 28)
Noise Information
Noise emission values determined according to
EN 62841-3-9 .
Typically, the A-weighted noise level of the power tool is:
Sound pressure level
93 dB(A); sound power level
106 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
The noise emission value given in these instructions has
been measured in accordance with a standardised measur-
ing procedure and may be used to compare power tools. It
may also be used for a preliminary estimation of noise emis-
sions.
The noise emission value given represents the main applica-
tions of the power tool. However, if the power tool is used
for other applications, with different application tools or is
poorly maintained, the noise emission value may differ. This
may significantly increase noise emissions over the total
working period.
To estimate noise emissions accurately, the times when the
tool is switched off, or when it is running but not actually be-
ing used, should also be taken into account. This may signi-
ficantly reduce noise emissions over the total working
period.
Bosch Power Tools 1 609 92A 6TT | (19.07.2021)