18
| English
u
Do not expose a battery pack or tool to fire or excess-
ive temperature.
Exposure to fire or temperature above
130°C may cause explosion.
u
Follow all charging instructions and do not charge the
battery pack or tool outside the temperature range
specified in the instructions.
Charging improperly or at
temperatures outside the specified range may damage
the battery and increase the risk of fire.
Service
u
Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This
will ensure that the safety of the power tool is maintained.
u
Never service damaged battery packs.
Service of bat-
tery packs should only be performed by the manufacturer
or authorized service providers.
Hammer Safety Warnings
Safety instructions for all operations
u
Wear ear protectors.
Exposure to noise can cause hear-
ing loss.
u
Use auxiliary handle(s), if supplied with the tool.
Loss
of control can cause personal injury.
u
Hold the power tool by insulated gripping surfaces,
when performing an operation where the cutting ac-
cessory or fasteners may contact hidden wiring .
Cut-
ting accessory or fasteners contacting a "live" wire may
make exposed metal parts of the power tool "live" and
could give the operator an electric shock.
Safety instructions when using long drill bits with rotary
hammers
u
Always start drilling at low speed and with the bit tip
in contact with the workpiece.
At higher speeds, the bit
is likely to bend if allowed to rotate freely without contact-
ing the workpiece, resulting in personal injury.
u
Apply pressure only in direct line with the bit and do
not apply excessive pressure.
Bits can bend, causing
breakage or loss of control, resulting in personal injury.
Additional safety information
u
Use suitable detectors to determine if there are hid-
den supply lines or contact the local utility company
for assistance.
Contact with electric cables can cause
fire and electric shock. Damaging gas lines can lead to ex-
plosion. Breaking water pipes causes property damage.
u
Always wait until the power tool has come to a com-
plete stop before placing it down.
The application tool
can jam and cause you to lose control of the power tool.
u
Secure the workpiece.
A workpiece clamped with
clamping devices or in a vice is held more secure than by
hand.
u
In case of damage and improper use of the battery, va-
pours may be emitted. The battery can set alight or ex-
plode.
Ensure the area is well ventilated and seek medical
attention should you experience any adverse effects. The
vapours may irritate the respiratory system.
u
Do not open the battery.
There is a risk of short-circuit-
ing.
u
The battery can be damaged by pointed objects such
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
u
Only use the battery in the manufacturer's products.
This is the only way in which you can protect the battery
against dangerous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture.
There is a risk of explosion and
short-circuiting.
u
Do not touch any application tools or adjacent housing
components shortly after operation.
These can become
very hot during operation and cause burns.
u
The application tool may jam during drilling. Make
sure you have a stable footing and hold the power tool
firmly with both hands.
Otherwise you could lose con-
trol of the power tool.
u
Take care when carrying out demolition work using
the chisel.
Falling fragments of the demolition material
could injure you or any bystanders.
u
Hold the power tool firmly with both hands and make
sure you have a stable footing.
The power tool can be
more securely guided with both hands.
WARNING
Ensure that the coin cell is kept
out of the reach of children.
Coin cells are dangerous.
u
Coin cells must never be swallowed or inserted into
any other part of the body. If you suspect that
someone has swallowed a coin cell or that a coin cell
has entered the body in another way, seek medical at-
tention immediately.
Swallowing coin cells can result in
severe internal burns and death within 2 hours.
u
Ensure that coin cell replacement is carried out prop-
erly.
There is a risk of explosion.
u
Only use the coin cells listed in this operating manual.
Do not use any other coin cells or other forms of electrical
power supply.
u
Do not attempt to recharge the coin cell and do not
short circuit the coin cell.
The coin cell may leak, ex-
plode, catch fire and cause personal injury.
u
Remove and dispose of drained coin cell correctly.
Drained coin cell may leak and damage the product or
cause personal injury.
u
Do not overheat the coin cell or throw it into fire.
The
coin cell may leak, explode, catch fire and cause personal
injury.
1 609 92A 866 | (27.09.2022)
Bosch Power Tools
Содержание Professional GBH 18V-24 C
