8
The gas burner
Operation
It is essential to ensure that all the burner parts and the pan
supports are correctly installed for the appliance to work
correctly. Fig. 1 + 2.
Switching on
manually
1. Press the burner control and turn it anticlockwise to the
ignition position .
2. Use any type of lighter or flame (cigarette lighter, matches,
etc.) and bring it close to the burner.
Switching on
automatically
1. Press the burner control and turn it anticlockwise to the
ignition position .
While the control is still pressed down, sparks are produced
on the burner. The flame ignites (it is no longer necessary to
press down the control).
2. Turn the control to the required setting.
If it does not come on, turn the control to the off setting and
repeat the steps above. This time, press and hold the control
for longer (up to 10 seconds).
Warning! If after 15 seconds have elapsed, the flame does not
ignite, switch off the burner and open a nearby window or
door. Wait at least one minute before trying to switch the
burner back on.
Fig. 1
Fig. 2
