background image

18

 | English

Digital laser measure

PLR 30 C

PLR 40 C

Bluetooth

®

Bluetooth

® 4.2

(Low Energy)

E)

Bluetooth

® 4.2

(Low Energy)

E)

Operating frequency range

2402–2480 MHz

2402–2480 MHz

Max. transmission power

2.5 mW

2.5 mW

A) When measuring from front edge. In unfavourable conditions such as very strong lighting, a tem-

perature greatly deviating from 25 °C or a poorly reflecting surface, the measuring range can be
restricted.

B) In unfavourable conditions such as strong lighting, high altitudes or a poorly reflecting surface, the

maximum deviation can be ±4 mm with a deviation of ±0.15 mm/m. In favourable conditions, a
deviation of ±0.05 mm/m needs to be taken into account.

C) Only non-conductive deposits occur, whereby occasional temporary conductivity caused by con-

densation is expected.

D)

Bluetooth

® deactivated

E) When using 

Bluetooth

® Low Energy devices, it may not be possible to establish a connection de-

pending on the model and operating system. 

Bluetooth

® tools must support the GATT profile.

The serial number 

(11)

 on the type plate is used to clearly identify your measuring tool.

Inserting/Changing the Battery

Always replace all the non-rechargeable batteries at the same time. Only use non-
rechargeable batteries from the same manufacturer and which have the same ca-

pacity.

When inserting the batteries, ensure that the polarity is correct according to the il-
lustration on the inside of the battery compartment.

u

Take the non-rechargeable batteries out of the measuring tool if you are not using
it for a long time

. The non-rechargeable batteries can corrode and self-discharge dur-

ing prolonged storage.

Operation

Start-Up

u

Never leave the measuring tool unattended when switched on, and ensure the
measuring tool is switched off after use.

 Others may be dazzled by the laser beam.

u

Protect the measuring tool from moisture and direct sunlight.

u

Do not expose the measuring tool to any extreme temperatures or variations in
temperature.

 For example, do not leave it in a car for extended periods of time. In case

1 609 92A 6KX | (24.06.2021)

Bosch Power Tools

Содержание PLR30C










Отзывы: