30
| English
1 609 92A 1F1 | (25.8.15)
Bosch Power Tools
Area Measurement
For surface measurements, repeatedly press button
2
until the indicator for surface
measurement
appears on the display
5
.
Then measure the width and length one after the other as with a length measurement.
The laser beam remains switched on between the two measurements. The distance
to be measured flashes in the indicator for area measurement
.
The first measured value is shown at the top of the display.
After the second measurement has been completed, the area
will be automatically calculated and displayed. The end result is
shown at the bottom of the display, while the individual meas-
ured values are shown above it.
Volume Measurement
For volume measurements, repeatedly press button
2
until the indicator for volume
measurement
appears on the display
5
.
Then measure the width, length and height one after the other as with a length meas-
urement.The laser beam remains switched on between the three measurements. The
distance to be measured flashes in the indicator for volume measurement
.
After the third measurement has been completed, the volume
will be automatically calculated and displayed. The end result is
shown at the bottom of the display, while the individual meas-
ured values are shown above it.
Continuous Measurement (Tracking) (see figure C)
For continuous measurements, the measuring tool can be moved relative to the tar-
get, whereby the measuring value is updated approx. every 0.5 seconds. In this man-
ner, as an example, you can move a certain distance away from a wall, while the actual
distance can always be read.
For continuous measurements, repeatedly press the button
2
until the indicator for
continuous measurement
appears on the display
5
.
29.589 m
29.589 m
875.51 m
2
29.589 m
29.589 m
29.589 m
25905.4 m
3
OBJ_BUCH-2312-003.book Page 30 Tuesday, August 25, 2015 8:20 AM