Bosch PIT...F SERIES, Инструкция по эксплуатации

Страница: 9 / 20

9
Combi zone function
Using this function, the two left hotplates of the same size can
be linked together. When doing this, the same heat setting is
set for both hotplates. This is especially suitable for cooking
with oblong cookware.
Notes regarding cookware
To achieve the best results, use suitable, oval cookware in the
area of both hotplates. Position the cookware in the middle of
the hotplates.
When you are using cookware on just one of the two hotplates,
it can be moved to the second hotplate. In this case, the heat
setting and the selected settings are transferred.
Activation
The hob must be switched on.
1.
Select one of the two hotplates which are included in the
combi zone and set the heat setting.
2.
Touch the
ú
symbol. The
Ú
indicator lights up.
The heat setting appears in the display for the lower hotplate.
The function is activated.
Changing the power level
Change the desired power level in the programming zone.
Deactivation
Select one of the two hotplates which are included in this
function and select
‹
on the settings range.
The function is deactivated within approx. 3 seconds.
Move function
You can use this function to combine the two left hotplates of
the same size and select a different heat setting for each
hotplate. Preset heat settings:
Front hotplate = heat setting
Š
Rear hotplate = heat setting
‚ .
The heat settings for each hotplate can be changed
independently of each other.
Notes
■
Only place the cookware on one of the hotplates. The
function will not be activated if there is cookware on both
hotplates.
■
The heat setting lights up less brightly in the display for the
hotplate with no cookware; however it is not activated until
the cookware is moved onto and detected by this hotplate.
■
If the function has already been activated and a second piece
of cookware is placed on the free hotplate, the display lights
up less brightly, as before, but the hotplate is not active.
Advice on using cookware
To ensure that the cookware is detected and heat is distributed
evenly, correctly centre the cookware:
Only use one piece of cookware which only covers one
hotplate.
Moving the cookware from one hotplate to another: