background image

9

Accessing the basic settings

The hob must be turned off.

1.

Switch on the hob.

2.

Within the following 10 seconds, press and hold the 

@

 

symbol for 4 seconds.

™‚

 appears on the left of the screen and 

‹ 

on the right .

3.

Press the 

 @

 symbol until the indicator for the desired 

function is displayed.

4.

Then select the required setting using the 

and 

-

 symbols.

5.

Press the

 @

 symbol again and hold it for more than 4 

seconds.

The settings have been saved.

Quit

To leave the basic settings, turn off the hob at the main switch.

Care and cleaning

The advice and warnings contained in this section aim to guide 

you in cleaning and maintaining the hob, so that it is kept in the 

best possible condition

Hob

Cleaning

Clean the hob after each use. This prevents food remains left 

on the surface from burning. Wait until the hob is cold enough 

before attempting to clean it.
Only use cleaning products specifically designed for glass-

ceramic hobs. Follow the instructions provided on the 

packaging.
Do not use:

Abrasive products

heavy-duty cleaners, like oven sprays and stain removers

Pads that may scratch

High-pressure or steam cleaners 

Glass scraper

Remove dried-on food remains using a glass scraper.

1.

Release the scraper safety catch

2.

Use the blade to clean the hob surface

Do not attempt to clean the hob surface with the base of the 

scraper. This could result in scratching.

ã=

Risk of injury!!

The blade is extremely sharp. Risk of cuts. Protect the blade 

when not in use. Replace the blade immediately when any 

imperfections are found.

Care of the appliance

Apply an additive to protect and preserve the hob. Follow the 

advice and warnings provided with the product.

Hob frame

In order to avoid damage to the hob frame, follow the 

indications below:

Use only slightly soapy hot water

Do not use sharp or abrasive products

Do not use a glass scraper

 Fixing malfunctions

Malfunctions are generally caused by minor faults. Before 

contacting the Technical Assistance Service, make sure you 

have read the following recommendations and warnings.

Indicator

Malfunction

Measure

none

The electric power supply has been inter-

rupted. 

Use other electrical appliances to check if there has been a power 

cut. 

The appliance has not been correctly con-

nected following the connection diagram.

Make sure that the appliance has been connected correctly.

Electronic system malfunction.

If in the above checks, the malfunction is not resolved, contact the 

Technical Assistance Service.

* If the warning persists call the Technical Assistance Service.

Do not place hot pans on the control panel.

Содержание PIC6..E1 Series













Отзывы: