Bosch pia611t14e, Инструкция по установке и эксплуатации

Страница: 11 / 16

11
Changing or cancelling the time
Press the
0
symbol several times until the required
x
indicator lights up. Change the cooking time using the
+
or
-
symbols, or set to ‹‹ .
Notes
■
If a cooking time has been programmed in several zones, it
can be set to display all time values. To do this, press the
0
symbol several times until the
x
indicator for the required
hotplate lights up.
■
Cooking times of up to 99 minutes can be programmed.
The timer
The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. This function does not
automatically switch off a hotplate.
How to program
1.
Press the
0
symbol several times until the
W
indicator lights
up.
‹‹
is displayed on the time program function display.
2.
Set the time required using the
+
or
-
symbols.
After a few seconds, the timer will start to count down.
Once the time has elapsed
A warning beep sounds. In the time program function display
‹‹ is shown, and the W indicator comes on. After 10 seconds
the indicators turn off.
Pressing the
0 symbol turns off the indicators and stops the
beep.
Changing or cancelling the time
Press the
0
symbol several times until the
W
indicator lights
up. Change the cooking time or set to
‹‹
with the symbols
+
or
-
.
Childproof lock
The hob can be protected against being accidentally turned on,
to ensure that children do not switch on the hotplates.
Activating and deactivating the childproof
lock.
The range must be turned off.
To turn on: press and hold the
@ symbol for approx.
4 seconds. The
@
indicator lights up for 10 seconds. The
range is locked.
To turn off: press and hold the
@ symbol for approx.
4 seconds. The lock is now deactivated.
Activating and deactivating the childproof
lock
With this function, the childproof lock automatically activates
when a hob is switched off.
Activating and deactivating
See the “Basic Settings" section.
Automatic time limitation
If the hotplate remains in use for a long time (depending on the
power level selected from 1 to 10 hours) and no changes are
made in the settings, the automatic time limitation function is
triggered. The hotplate stops heating. On the hotplate display,
”
and
‰
flash alternately.
The indicator goes out when any symbol is pressed.
Basic settings
The device has several basic settings. These settings may be
adapted to the user's individual needs.
Indicator Function
™‚
Childproof lock
‹
Deactivated.*
‚
Activated.
™ƒ
Sound signals
‹
Confirmation beep and error signal deacti-
vated.
‚
Only confirmation beep deactivated.
ƒ
All signals activated.*
™†
Automatic timer
‹ Switched off.*
‚
-
ŠŠ
Automatic shut-off time
*Factory settings