en
Installation and connection
8
If an oven is positioned below the cooktop the barrier
does not need to be fitted, but a space of 35 mm must
be maintained between the underside of the cooktop
and the top of the oven.
Installation of cooktop into the kitchen
bench
Side clearances: If the distance measured from the
periphery of the nearest burner to any vertical surface is
less than 200 mm, the surface shall be protected in
accordance with clauses 6.10.1.2 of AS/NZS 5601.1.
Modular hobs may be installed with the joint
accessories available from our technical assistance
service.
Make an appropriate size cut in the work surface.
Seal all work surfaces made of wood with special
sealer/glue to protect it against moisture damage.
Note:
Wear protective gloves to fit the hob.
Depending on the model, the adhesive seal may be
factory-fitted. If this is the case, it should not be
removed under any circumstances: the adhesive seal
prevents leaks. If the seal has not been factory-fitted,
apply it to the underside of the hob, protruding around
3 mm.
Fitting the appliance onto the kitchen unit:
1.
Remove the clips from the accessory bag and place
them in the lateral orifices.
2.
Insert and centre the hob.
3.
Press the sides of the hob until it is supported
around its entire perimeter.
Electrical connection
An electrical 10 amp socket needs to be within 1 m of
the hotplate to allow electrical connection. The socket
must remain accessible after installation of the
appliance.
Important notes:
■
This appliance is connected to the mains (240 VAC)
by means of the connecting lead which must be
fixed to the kitchen unit to prevent it from coming
into contact with hot parts of the cooktop (or an oven
installed underneath) and remain accessible after
installation of the cooktop.
When making this connection make sure that the
lead cannot come into contact with hot parts of the
cooktop.
■
This appliance must be earthed. When connecting
the cooktop ensure that the earth wire is connected
first and that all wires are connected to the correct
terminals.
NEZ34VLA coupling profile
NEZ34VLB profile for coupling with glass ceramic hob
PLQPP
PLQ
PP
PLQPP
PLQ
PP
PLQ
PP
PLQPP
PP
/
9
9
1
99 a
Содержание PGB3B5B80A
Страница 2: ......
