Time-setting options
en
9
8
Time-setting options
Your appliance has different time-setting options which
can be used to set a cooking time, an automatic timer
or a kitchen timer.
8.1 Cooking time
Enter a cooking time for the relevant hotplate. When
the cooking time has elapsed, the hotplate switches off
automatically.
You can set a cooking time of up to 99 minutes.
Setting the cooking time
1.
Set the hotplate heat setting.
2.
Touch .
a
The
indicator for the hotplate lights up.
lights
up on the timer display.
3.
Touch or .
The default value appears.
–
30 minutes.
–
10 minutes.
a
The cooking time counts down. If you have set a
cooking time for several hotplates, you can display
each cooking time. To do so, repeatedly touch
until the
indicator lights up brightly.
a
When the cooking time has elapsed, the hotplate
switches off. A signal sounds and
flashes on the
display for 10 seconds. Turn off the hotplate switch.
Changing or cancelling the cooking time
1.
Repeatedly touch until the
indicator for the re-
quired hotplate lights up brightly.
2.
Change the cooking time using or or set to .
Automatic timer
You can use this function to preselect a cooking time
for all hotplates. Each time a hotplate is switched on,
the preselected cooking time counts down. When the
cooking time has elapsed, the hotplate switches off
automatically.
"Switch on the automatic timer in the basic settings."
Tip:
"The automatic timer is valid for all hotplates. You
can reduce or delete the cooking time for individual
hotplates."
8.2 Kitchen timer
You can set a time of up to 99 minutes after which a
signal will then sound. The kitchen timer runs inde-
pendently of all other settings.
Setting the kitchen timer
1.
Repeatedly touch until the indicator lights up.
a
lights up on the timer display.
2.
Use or to set the time.
a
The time counts down.
a
When the time has elapsed, a signal sounds.
lights up on the timer display for 10 seconds.
Displaying the time
▶
Select the kitchen timer with .
a
The time is displayed for 10 seconds.
9
Automatic switch-off
If you do not change the settings of a hotplate for a
long time, automatic switch-off will be activated.
When the hotplate switches off depends on the heat
setting selected (1 to 10 hours).
The hotplate stops heating.
and the residual heat in-
dicator / flash alternately on the hotplate display.
Switch the hotplate off.
Note:
You can switch the hotplate back on again at any
time.
10
Wipe protection
Wiping over the control panel while the hob is switched
on may alter settings. Your hob has a wipe protection
function to prevent this.
10.1 Activating wipe protection
▶
Touch .
a
A signal sounds.
a
The indicator lamp above lights up.
a
The control panel is locked for 30 seconds.
