21
Panel Lock
You can use the panel lock to prevent children from
accidentally turning the appliance on.
Activating and deactivating the panel lock
The cooktop must be turned off.
To activate:
1.
Switch on the cooktop using the main switch.
2.
Touch the
panel lock
key for approx. 4
seconds.
The
D
indicator lights up for 10
seconds.
The cooktop is locked.
To deactivate:
1.
Switch on the cooktop using the main switch.
2.
Touch the
panel lock
key for approx. 4
seconds.
The lock is released.
Automatic panel lock
With this function, the panel lock is automatically
activated whenever you turn off the cooktop.
Activating and deactivating
You can find out how to activate the automatic Panel
Wipe Protection
If you wipe over the control panel while the cooktop is
switched on, settings may be changed. To avoid doing
this, you can use the cooktop's "Lock control panel for
cleaning" function.
To switch on: Touch the
panel lock
touch key. An audible
signal sounds. The control panel is locked for
35 seconds. You can now wipe over the surface of the
control panel without changing any settings.
To deactivate: The control panel will be unlocked once
35
seconds have elapsed. To release the function early,
touch the
panel lock
touch key.
Notes
▯
An audible signal sounds 30
seconds after activation.
This indicates that the function is about to finish.
▯
The wipe protection function does not lock the main
switch. The cooktop can be switched off at any time.
Automatic time limitation
If the element is used for prolonged periods of time
without changes in the settings being made, the
automatic time limitation function is triggered.
The element stops heating.
”‰
and the residual heat
indicator
•
/
œ
flash alternately in the display.
The indicator goes out when any symbol is pressed. The
element can now be reset.
When the automatic time limitation is activated depends
on the selected heat level (from 1
to 10
hours).
Basic settings
The appliance has various basic settings. You can adjust
these settings to the way you usually cook.
Indicator/
symbol
Function
™‚
Panel lock
‹
Manual*.
‚
Automatic.
ƒ
Function deactivated.
™ƒ
Signal tones
‹
Confirmation and error signals are switched off.
‚
Only the error signal is switched on.
ƒ
Only the confirmation signal is switched on.
„
All signal tones are switched on.*
™„
Display energy consumption
‹
Deactivated.*
‚
Activated.
™†
Automatically setting the cooking time
‹‹
Switched off.*
‹‚
-
ŠŠ
Time until automatic switch-off.