Bosch NIT8069SUC, Инструкция по использованию и уходу

Страница: 31 / 68

31
again, contact Customer Support and tell them the
precise fault code.
▯
If a fault occurs, the appliance will not switch to
standby mode.
Suitability test of cookware
This function can be used to check the speed and quality
of the cooking process depending on the cookware.
The result is a reference value and depends on the
properties of the cookware and the element being used.
1.
With the cookware still cold, fill it with approx. 8 oz.
(200 ml) of water and place it on the center of the
cooking zone with the diameter that most closely
matches the base of the cookware.
2.
Go to the basic settings and select the
™‚ƒ
setting.
3.
Touch the settings range.
A
will flash on the cooking
zone display.
The function has now been activated.
After 10 seconds, the result for the quality and speed of
the cooking process will appear on the cooking zone
display.
Check the result using the table below:
To reactivate this function, touch the settings range.
Notes
▯
If the diameter of the used cooking zone is much
smaller than the diameter of the cookware, only the
middle of the cookware can be expected to heat up.
This may result in the cooking results not being as
good as expected or being less than satisfactory.
▯
You can find information on this function in the section
~
"Basic settings"
▯
You can find information on the type, size and
positioning of the cookware in the section
~
"Cooking with Induction"
How to Obtain Warranty Service
To obtain warranty service for your Product, you should
contact the nearest Bosch authorized servicer.
Model (E) number and FD number
When you contact our service, please have the Model
(E) number and the FD number for your appliance
available.
You can find the identification plate with these numbers:
▯
in the appliance booklet
▯
on the underside of the appliance
You can also find the (E) number on the glass ceramic of
your cooktop. You can check the Customer Service
Index (CSI) and the FD number in the basic settings.
Please refer to the section on
~
"Basic settings"
Questions? Please contact us. We look forward to
hearing from you.
Result
‹
The cookware is not suitable for the element and
will therefore not heat up.*
‚
The cookware is taking longer to heat up than
expected and the cooking process is not going as
well as it ought to.*
ƒ
The cookware is heating up correctly and cooking
is progressing well.
* If there is a smaller element available, try the cook-
ware again on the smaller element.
VSHHG
ERRVW
NLWFKHQ
WLPHU
FRRN
WLPHU FRXQWXS
WLPHU
DXWR
FKHI NHHS
ZDUP
0DLQ6WUHHW6XLWH
,UYLQH&$
ZZZERVFKKRPHFRP