Bosch NIT5668UC, Инструкция по использованию и уходу

Страница: 13 / 68

13
Cook time
You can use the timer function to set a cook time for any
element. The element will turn off automatically once the
set time has elapsed.
9
CAUTION
▯
When using the timer, always keep an eye on the
cooktop and do not allow anything to boil over or
burn. Boilovers can cause smoke and foods and
oils may catch on fire if left on high temperature
settings.
▯
This function should not be used for long periods
of time, especially at high heat settings.
▯
Make sure the cooktop is turned off with the main
power switch after each use.
Setting a cook time
The cooktop must be turned on.
1.
Select the desired element and power level.
2.
Touch the
Timer
key. The
x
indicator lights up in the
element display and
‹‹
is shown in the timer display.
3.
Whithin 10 seconds enter the desired cook time using
the number keys.
After a few seconds the timer will start to count down.
Changing or cancelling cook time
1.
Select the desired element and touch the
Timer
key.
2.
Adjust the cook time using the number keys. To
cancel cook time set the timer to
‹‹
.
Once the cook time has elapsed
The element turnes off once the set cook time has
elapsed. You will hear a beep. The indicator
‹
appears in
the element display and the timer display shows ‹‹ for
10 seconds. The
x
indicator in the element display
stays on.
Touch the
Timer
key, to turn the indicators and the beep
off.
Notes
▯
To set a cooking time of under 10 minutes, always
touch
0
before you select the required value.
▯
If a cooking time was set for several elements, the time
information for the selected element is shown in the
timer display.
▯
Select the relevant element to call up the remaining
cooking time.
▯
You can set a cooking time of up to
ŠŠ
minutes.
Automatic timer
With this function you may select a cook time for all
elements. Once an element is turned on, the selected
time will begin to count down. The element will
automatically turn off when the cook time has elapsed.
Instructions on activating the automatic timer are found in
the section on
~
"Basic settings"
Note:
The cook time can be changed or cancelled for
any element:
Select the desired element and touch the
Timer
key
twice. The remaining cook time for the element is
displayed. Adjust the cook time using the number keys,
or deactivate it by setting the the timer value to
‹‹
.
Kitchen timer
The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. You can also use the
kitchen timer when the cooktop is turned off or locked.
This function does not automatically switch off an
element.
Setting the kitchen timer
1.
Touch the
Timer
key until the
V
indicator lights up.
‹‹
and
min
appear on the timer display.
2.
Set the desired time using the number keys.
The timer start to count down after a few seconds.
Changing or deleting the time
Touch the
Timer
key repeatedly until the
V
indicator
lights up.
Change the time using number keys, or set
‹‹
in order
to delete the programmed time.
When the time has elapsed
A beep sounds.
‹‹
appears on the timer display and the
V
indicator lights up. The displays go out after
10 seconds.
When the
Timer
key is touched, the displays go out and
the beep stops.