Basic settings
en
9
10 Basic settings
You can configure the appliance to meet your needs.
10.1 Overview of the basic settings
Display
Setting
Value
Childproof lock
- Manual.
1
Automatic.
- Function switched off.
Audible signals
– Confirmation and fault signals are switched off.
– Only the fault signal is switched on.
– Only the confirmation signal is switched on.
– All signal tones are switched on
1
.
Switching off the hotplates automatically
- Switched off.
1
-
- Time until the automatic switch-off.
Duration of the timer end signal tone
– 10 seconds
1
– 30 seconds
- 1 minute
Cookware test
Result of the cooking process
- Not suitable.
- Not optimal.
- Suitable.
Restoring factory settings
- Individual settings
1
.
- Factory settings.
1
Factory setting
10.2 To go to the basic settings
Requirement:
The hob must be switched off.
1.
Select the power level on the front-left cooking
zone.
2.
Within the next 10 seconds, press and hold
for
four seconds.
Product information
Display
Directory for the technical after-sales
service (TK)
Production number
Production number 1
.
Production number 2
.
a
The first four displays provide the product informa-
tion. Touch or to view the individual displays.
3.
Touch
to access the basic settings.
a
and light up alternately as well as as a preset
value.
4.
Touch
repeatedly until the desired setting ap-
pears.
5.
Use or to select the required value.
6.
Touch and hold
for four seconds.
a
The settings are saved.
10.3 Exiting the basic settings
▶
Turn all of the switches to position 0.
11 Cookware test
The quality of the cookware has a major influence on
the speed and the result of the cooking process.
You can use this function to test the quality of the cook-
ware.
Before the test, ensure that the diameter of the cook-
ware base corresponds to the diameter of the cooking
zone being used.
Access is via the basic settings. →
11.1 Procedure for checking the cookware
1.
Set the cookware at room temperature with approx.
200 ml water in the centre of the cooking zone
whose diameter best fits the diameter of the base of
the cookware.
2.
Call up the basic settings and select .
3.
Touch or . The display flashes in the cooking
zones.
a
The function has been activated.
a
After 10 seconds, the result appears in the cooking
zone displays.
