6 | NDN-498 FlexiDome2X Day/Night IP Cameras
Sensitivity (3200 K, scene reflectivity 89%)
Full video
(100 IRE)
Usable picture
(50 IRE)
Minimum illumi-
nation (30 IRE)
NDN-498V03 (F1.2)
Color
2.48 lx
(0.23 fc)
0.621 lx
(0.058 fc)
0.28 lx
(0.027 fc)
Color
+ SensUp 10x
0.248 lx
(0.023 fc)
0.062 lx
(0.0058 fc)
0.028 lx
(0.0027 fc)
Monochrome
1.01 lx
(0.093 fc)
0.23 lx
(0.021 fc)
0.099 lx
(0.0092 fc)
Monochrome
+ SensUp 10x
0.1 lx
(0.0093 fc)
0.023 lx
(0.0021 fc)
0.0099 lx
(0.00092 fc)
NDN-498V09 (F1.4)
Color
2.7 lx
(0.26 fc)
0.69 lx
(0.064 fc)
0.321 lx
(0.03 fc)
Color
+ SensUp 10x
0.27 lx
(0.026 fc)
0.069 lx
(0.0064 fc)
0.032 lx
(0.003 fc)
Monochrome
1.1 lx
(0.090 fc)
0.27 lx
(0.026 fc)
0.11 lx
(0.01 fc)
Monochrome
+ SensUp 10x
0.11 lx
(0.01 fc)
0.027 lx
(0.0026 fc)
0.011 lx
(0.001fc)
Day/Night
Color, Mono, Auto
Modes
6 preset programmable modes
Dynamic range
120 dB (20-bit image processing)
Signal-to-Noise Ratio
>50 dB
Dynamic engine
2X-Dynamic, XF-Dynamic, S2X-Dy-
namic
SmartBLC
On (includes 2X-Dynamic ) / Off
AGC
AGC On or Off (0 - 30 dB) selectable
White Balance
ATW, ATWhold and manual (2500 to 10000K)
Shutter
Auto (1/50 [1/60] to 1/10000) selectable
Auto (1/50 [1/60] to 1/50000) automatic
flickerless, fixed selectable
Sensitivity up
Adjustable from Off up to 10x
Auto Black
Automatic continuous, Off
Dynamic Noise Reduction Auto, On/off selectable
Sharpness
Sharpness enhancement level selectable
Peak White Invert
On/Off
Privacy Masking
Four independent areas, fully programmable
Video Motion Analysis
or IVA
Test Pattern Generator
Color bars 100%, Grayscale 11-step, Saw-
tooth 2H, Checker board, Cross hatch, UV
plane
Synchronization
Internal, Line Lock, HV-lock and Genlock
(Burst lock) selectable
Controls
OSD with soft-key operation (multi-lingual)
Audio
Standard G.711
300 Hz to 3.4 kHz at 8 kHz sampling rate
Signal-to-noise ratio
> 50 dB
Input/output
Audio
1 x mono line in, 1 x mono line out
•
signal line in
9 kohm typical, 5.5 Vpp max
•
signal line out
3.0 Vpp at 10 kOhm typical,
2.3 Vpp at 32 Ohm typical,
1.7 Vpp at 16 Ohm typical
Alarm
1 non-isolated closing contact
•
activation voltage
+5 VDC to +40 VDC
(+3.3 VDC with DC-coupled 22 kOhm pull-up
resistor)
Relay
1 output
•
voltage
30 VAC or +40 VDC
Maximum 0.5 A continuous, 10VA
Software Control
Unit Configuration
Via web browser or Configuration Manager
Flicker Control
50/60 Hz, selectable
Software update
Flash ROM, remote programmable
Network
Protocols
RTP, Telnet, UDP, TCP, IP, HTTP, HTTPS,
FTP, DHCP, IGMP V2/V3, ICMP, ARP, SMTP,
SNTP, SNMP, 802.1x, UPnP
Encryption
TLS 1.0, SSL, AES (optional)
Ethernet
STP, 10/100 Base-T, auto-sensing, half/full
duplex, RJ45
PoE SUPPLY
IEEE 802.3af compliant
Optical
Varifocal lens
IR corrected, manual zoom and focus adjust-
ment
Iris control
Automatic iris control
Viewing angle
2.8 to 10 mm
Wide 100.8 x 73.7º (H x V)
Tele 28.5º x 21.4º (H x V)
9 to 22 mm
Wide: 31.2º x 22.8º (H x V)
Tele: 12.8º x 9.6º (H x V )
Mechanical
Weight
0.67 kg (1.48 lb)
+SMB: 1.29 kg (2.84 lb)
Mounting
Flush mount or surface mount
Color
White (RAL9010) trim ring with black inner
liner
Adjustment range
360º pan, 90º tilt, ±90º azimuth
Dome bubble
Polycarbonate, clear with UV blocking anti-
scratch coating
Trim ring
Aluminum
