IP Camera 200 Series
Advanced Mode | en
91
Bosch Security Systems
Installation and Operation Manual
AR18-10-B012 | v1.5 | 2011.01
If the operating status LED lights up red, the upload has failed
and must be repeated. To perform the upload, switch to a
special page:
1.
In the address bar of your browser, enter /main.htm after
the device IP address, for example:
192.168.0.10/main.htm
2.
Repeat the upload.
Configuration
Save configuration data for the camera to a computer and load
saved configuration data from a computer to the device.
To save the camera settings:
1.
Click
Download
; a dialog box appears.
2.
Follow the instructions to save the current settings.
To load configuration data from the computer to the device:
1.
Enter the full path of the file to upload or click
Browse
to
select the desired file.
2.
Make certain that the file to be loaded comes from the
same device type as the device to be reconfigured.
3.
Click
Upload
to begin transmission to the device. The
progress bar allows monitoring of the transfer.
Once the upload is complete, the new configuration is
activated. The time remaining is shown by the message
going to
reset Reconnecting in ... seconds
. When the upload is
completed successfully, the device reboots automatically.
SSL certificate
To work with an SSL connection, both sides of the connection
must have the appropriate certificates. Upload one or more
certificate files, one at a time, to the camera.
1.
Enter the full path of the file to upload or click
Browse
to
locate the file.
2.
Click
Upload
to start the file transfer.
Once all files have been successfully uploaded, the device must
be rebooted. In the address field of the browser, enter /reset
after the camera's IP address, for example:
192.168.0.10/reset
The new SSL certificate is valid.
Содержание NDC-225-PI
Страница 1: ...IP Camera 200 Series NDC 225 PI en Installation and Operation Manual ...
Страница 2: ......
Страница 107: ......
Страница 108: ...Bosch Security Systems www boschsecurity com Bosch Security Systems 2012 ...