Bosch NBN-733, Руководство пользователя программного обеспечения, Страница: 107 / 111

114 en | Service Camera Browser Interface
AM18-Q0635 | v5.6 | 2013.01 Software manual Bosch Security Systems
3. Click Upload to begin transferring the file to the device.
The progress bar allows monitoring of the transfer.
The new firmware is unpacked and the Flash memory is
reprogrammed. The time remaining is shown by the message
going to reset Reconnecting in ... seconds . When the upload is
completed successfully, the device reboots automatically.
If the operating status LED lights up red, the upload has failed
and must be repeated. To perform the upload, switch to a
special page:
1. In the address bar of your browser, enter /main.htm after
the device IP address, for example:
192.168.0.10/main.htm
2. Repeat the upload.
15.1.3 Configuration
Save configuration data for the camera to a computer and load
saved configuration data from a computer to the device.
To load configuration data from the computer to the device:
1. Click Load From... ; a dialog box appears.
2. Locate and open the desired configuration file.
Make certain that the file to be loaded comes from the
same device type as the device to be reconfigured. The
progress bar allows monitoring of the transfer.
To save the camera settings:
1. Click Save As... ; a dialog box appears.
2. Enter a file name if required and save.
15.1.4 SSL certificate
To work with an SSL connection, both sides of the connection
must have the appropriate certificates. Upload one or more
certificate files, one at a time, to the camera.
1. Enter the full path of the file to upload or click Browse... to
locate the file.
2. Click Upload to start the file transfer.